Filter
Top Products
Form Number TM61310 Rev 2 Aug 2007
Page 11
e Test: Table 2: AC Voltag
Step
Range
Input Frequency
Reading
1
200V
2.0V 60Hz 1.0 to 3.0
2
200V
2.0V 400Hz 1.0 to 3.0
3
200V
190.0V 60Hz 186.7 to 193.3
4
200V
190.0V 400Hz 186.7 to 193.3
5
600V
600V 60Hz 583.0 to 617.0
6
600V
600V 400Hz 583.0 to 617.0
Testing the DC milliamp
1
s 1-3 in Table 3.
meter
r does not meet
s and DC amps Function
. Turn the rotary switch to the DCA function and range shown in Table 3.
2. Apply the inputs for step
3. For each input, compare the reading on the meter display to the reading for your
in Table 3.
4. If the display reading falls outside of the range shown in Table 3, the mete
specification.
Table 3: DC Current Test:
Step
Range
Source Reading
1
200 mA
2.00 mA 1.8 to 2.2
2
200 mA
190.0 mA 186.9 to 193.1
3
10 A
10.00 A 9.65 to 10.35
Testing the Resis ce Fun
To verify the accur of the e function following:
1. Connect the calibrator to and COM on the meter.
2. Turn the rot switch to OHM. function e shown
3. Apply the inputs for step Table 4.
4. Compare th eter disp adings to t y readin
5. If the display reading falls out e of the range shown in Table 4, the s not meet
specification.
tan ction
acy resistanc , do the
V
ary and rang in Table 4
s 1-6 in
e m lay re he displa gs in Table 4.
sid meter doe