Filter
Top Products
12
NS-DPF7WM-09
www.insignia-products.com
Turning on the frame
To turn on the frame:
1
Extent the adjustable stand.
2 Rotate the stand to position the frame vertically or
horizontally. Adjust the stand's length to obtain the
viewing angle you want.
3 Plug the AC power adapter into the frame’s DC
power connector and into an AC power outlet.
4 Slide the Power On/Off switch to the ON position to
turn on the frame. The INSIGNIA logo is displayed
for several seconds, then the frame automatically
starts a slideshow of the pictures stored in internal
memory (when no memory card is present). If a
memory card is present, the frame shows the
picture(s) stored on the memory card.
Mounting your frame on a wall
Use wall-anchoring hardware (not included) to anchor
your frame securely to your wooden wall.
To change to portrait, turn your frame 90° and use the
wall mounting holes at the top.
08-1607 NS-DPF7WM-09 - ENG.fm Page 12 Thursday, August 28, 2008 11:40 AM