Filter
Top Products
3
To charge the battery
1 Plug the battery charger power cord into a power outlet.
2 Insert the battery into the charging slot. Make sure that the + and – on the battery align with
the + and – in the charging slot.
Installing the battery
1 Make sure that your camera is turned o .
2 Slide the cover in the direction of the arrow, then lift the cover away
from the battery compartment
3 Insert the battery into the battery compartment. Make sure that the +
and – symbols on the battery line up with the + and – symbols on your
camera.
4 Close the battery compartment cover, then slide the cover in the
direction of the arrow to lock it in place.
Inserting a memory card
1 Open the memory card compartment at the bottom of the camera.
2 Insert the SD or SDHC memory card into the card slot with the metallic
part facing the front of the camera.
3 Close the compartment.
Note: To remove the card, gently push the card until it pops out. Carefully pull out the card, then close
the compartment.
Turning the power on and o
1 Press and hold until the Insignia startup image appears. The zoom
lens extends, and if sounds are turned on, a startup sound plays.
2 Press
again to turn the camera o .