Insignia NS-DV720PBL2 Camcorder User Manual


 
10
NS-DV720PBL2 720p HD Digital Camcorder
www.insigniaproducts.com
Deleting pictures
To delete pictures:
1 Press to switch to playback mode. The
playback mode main menu opens.
2 Press or to highlight PICTURE, then press
SET to go to picture playback mode. The most
recent photo captured is displayed.
3 Press or to select the picture you want to
delete.
4 Press to highlight Delete. A message appears
asking to confirm the deletion.
5 Press or to highlight Ye s, then press SET to
delete the picture.
Or,
Press or to highlight No, then press SET to
cancel the deletion. (You can also press to
cancel the deletion and close the menu.)
Using camcorder features
Using the light
Your camcorder has a built-in light to provide
lighting in low-light environments.
To use the light:
1 Press on the five-way switch. The light turns
on and (digital light) appears on the LCD.
Digital light extends the dynamic range for
backlight and provides high contrast so objects
will be brighter and clearer.
2 Press again. The light changes to normal light
and appears on the LCD and indicates that
the LED light is turned on. The LED light
provides additional lighting in low-light
environments and has a range of 2 to 4 feet
(0.6 to 1.2 meters).
3 Aim the lens, then press to start recording.
Press again to stop recording.
4 Press again to turn off the light.
Using the self-timer
When you turn on the self-timer, your camcorder
waits 10 seconds before taking a picture.
To use the self-timer:
1 Aim the lens, then press . appears on the
LCD.
2 Press . The LED light on the front of your
camcorder blinks until the shutter operates
(about 10 seconds after you press . The
speed of the blinking increases just before the
picture is taken.
Notes
If a memory card is inserted, you can delete only
pictures stored on the card.
Pictures stored on a write-protected memory
card cannot be deleted.
Notes
Using the digital light will increase the grain of your
movie. This slight reduction in image quality is
normal.
Note
The LED light is automatically disabled when battery
power is low.