JVC 0397TOV*UN*YP Camcorder User Manual


 
EN 39
AM 10 : 24DEC 25. 97
MERRY CHR ISTMAS
TAPE END
05
MWB
DISP.
REC SP
SEPIA
LENS COVER
FADE
18MIN
T30
1MIN
1/2S
PAUSE
8
9
0
1
2 6 7
%
&
^
*
(
)
w
!
#
$
@
q
43 5
Viewfinder Indications
% Battery Pack Remaining Power Indicator
Changes as follows according to the battery pack’s
remaining power level: “
”.
When the power is almost gone, the indicator
blinks, then the unit shuts off. Replace the
battery pack with a fully charged one.
(Note: The symbol containing 3 darkened
squares — — does not necessarily mean
that the battery pack is fully charged.)
^ Focus Indicator ................................... pg. 18
& Exposure Level Indicator ..................... pg. 17
* White Balance Mode Indicator ........... pg. 23
( Menu Setting Change Indicator........... pg. 24
) Clock Warning
Displayed for about 5 seconds if the clock
(lithium) battery is not in place or is exhausted
when power is turned on. Also displayed for
about 5 seconds when clock battery becomes
exhausted while using the camcorder.
For inserting or replacing the clock
battery ................................................ pg. 10
q Condensation Warning
When this indication appears, all functions are
disabled. Turn the unit off (without removing the
power source) for a few hours, and when you
turn it on again the indicator should disappear.
w Tape End Display ................................ pg. 14
Appears when the end of the tape is reached
during playback, recording or fast-forward.
INDEX
Viewfinder
1 Cassette Warning/Remaining
Tape Time ........................................... pg. 14
When no cassette is inserted or when Erase
Protection tab is not in the position that allows
recording, the Cassette (
)Warning blinks.
Otherwise, the Remaining Tape Time is
displayed.
2 Recording Mode (SP/EP) Indicator ...... pg. 12
3, 9 PROGRAM AE Indicator................ pg. 16
Displayed at 3 for approx. 1 second when the
PROGRAM AE select dial is switched from one
position to another. Then only the indicator
remains at 9.
4 Program Manager Function
Indication ........................................... pg. 20
Appears when the PROGRAM AE select dial is
set to any position other than AUTO LOCK.
5 Lens Cover Warning ........................... pg. 14
6 Tape Length Display ........................... pg. 12
7 Zoom Level Indicator.......................... pg. 15
8 Recording Indicator ............................ pg. 14
0 Fade–Standby Indicator ...................... pg. 20
! Interval Time/Recording
Time Indicator..................................... pg. 26
@ Record–Standby Mode Indicator......... pg. 14
# Instant Title Display ............................ pg. 21
$ Date/Time Character Display .............. pg. 22