Filter
Top Products
Interpretation Change limit of sense up. Specify 0, 2, 4, 8, 16, 32, 60, "+" or "-". It becomes bigger 1 step by
specifying "+", smaller 1 step by specifying "-". The change of scene file 0 is saved by the API,
camera.scene(0).status=save. If the change is not saved, the setting is restored by reboot.
Allowed users admin, operator
Getting ALC priority of Scene File
Format /api/param?camera.scene(number).auto_exposure.priority
Example of response camera.scene(0).auto_exposure.priority=combo&200 OK
Interpretation Acquire ALC priority. ALC priority decides what is used first for auto exposure. “combo”, “motion”
or “quality”is returned.
Allowed users admin, operator, user
Setting ALC priority of Scene File
Format /api/param?camera.scene(number).auto_exposure.priority=data
Example /api/param?camera.scene(0).auto_exposure.priority=combo
Example of response camera.scene(0).auto_exposure.priority&202
Accepted(camera.scene(0).status=save)
Interpretation Change ALC priority. ALC priority decides what is used first for auto exposure. “combo”, “motion” or
“quality”is returned. In case of “combo”, selects the best combination automatically. In case of “motion”, assigns
priority to AGC. In case of “quality”, assigns priority to the Sense Up function.
Allowed users admin, operator, user
Getting Shutter Speed of a Scene File
Format /api/param?camera.scene(number).shutter
Example of response camera.scene(0).shutter=60&200 OK
Interpretation Acquire shutter speed setting. “auto”, "auto100", "auto1000", 30, 50, 60, 100, 250, 500, 1000,
2000, 4000, 10000 or "flickerless" is returned. For example, 60 means shutter speed 1/60. In case of “auto”, the
shutter speed is adjusted from 1/30 to 1/10000. In case of "auto100", the shutter speed is adjusted from 1/30 to
1/100. In case of "auto1000", the shutter speed is adjusted from 1/30 to 1/1000. In case of "flickerless", the shutter
speed that avoids flicker is selected automatically.
Allowed users admin, operator, user
Setting Shutter Speed of a Scene File
Format /api/param?camera.scene(number).shutter=data
Example of setting a value /api/param?camera.scene(0).shutter=60
Example of 1 step change /api/param?camera.scene(0).shutter=+