Filter
Top Products
EN 19
TW
Remote Control Unit
You can use the RM-V711U to control the camcorder. When using the remote control, be sure to point it at
the remote sensor. The transmitted beam effective area for indoor use is approx. 5 m. The transmitted beam
may not be effective or may cause incorrect operation if the remote sensor is directly exposed to sunlight or
powerful lighting.
Installing The Battery
The RM-V711U uses one lithium battery (CR2025).
1
PULL OUT BATTERY HOLDER
Pull out in the direction of the arrow while
pressing the knob as shown.
2
INSERT BATTERY IN HOLDER
Insert the battery in the holder, and be sure to
have the “+” mark visible.
3
RE-INSERT HOLDER
Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
(੬ pg. 2).
Operation Buttons
(੬ pg. 52, 68)
Up Button (੬ pg. 52)
INSERT Button (
੬ pg. 68)
Down Button (੬ pg. 52)
AUDIO MONITOR Button
(੬ pg. 67)
MBR SET Button (
੬ pg. 61)
A. DUB Button (੬ pg. 67)
START/STOP Button (੬ pg. 68)
PAUSE IN connector (੬ pg. 62)
EFFECT ON/OFF Button
(
੬ pg. 53)
EFFECT Button
(
੬ pg. 53)
FADE/WIPE Button
(
੬ pg. 63)
Left/Right Buttons
(
੬ pg. 52)
SLOW Rewind/Forward
Buttons (੬ pg. 51)
SHIFT Button (੬ pg. 52)
DISPLAY Button (੬ pg. 67)
Zoom Buttons (
੬ pg. 52)
Knob
R.A. EDIT Buttons (੬ pg. 63)