JVC GR-DVL915 Digital Camera User Manual


 
EN23
1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as
shown in the illustration ( pg. 22).
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3
Connect the VCR output to the TV input,
referring to your VCRs instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV . . .
Date/Time
.... set DATE/TIME to AUTO, ON or OFF
in the Menu Screen ( pg. 50).
Time Code
.... set TIME CODE to ON or OFF in the
Menu Screen (
pg. 50).
Playback Sound Mode, Tape Speed And Tape
Running Displays for video playback
Or
Directory/File Names and Image Number/Total
Number of Images for D.S.C. Playback
(GR-DVL915/DVL815/DVL510 only)
.... set ON SCREEN to LCD or LCD/TV in
the Menu Screen ( pg. 50).
Or, press DISPLAY on the remote control
(provided with GR-DVL915/DVL815 only).
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack
(
pg. 9).
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable.
Consult the JVC Service Center described on the
sheet included in the package for details on its
availability. Make sure to connect the end with a
core filter to the camcorder. The core filter
reduces interference.
To monitor the picture and sound from the
camcorder without inserting a tape or memory
card*, set the camcorders Power Switch to or
, then set your TV to the appropriate input
mode.
*
GR-DVL915/DVL815/DVL510 only
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the
TV as interference will occur in the camcorder
playback picture.
If no image is displayed or no sound is heard from
the TV, set S/AV INPUT to OFF in the Menu
Screen (GR-DVL915 only,
pg. 50).