Filter
Top Products
EN51
PLAYBACK SOUND
During video playback, the camcorder detects the sound mode in which the recording was made, and plays
the sound back. Select the type of sound to accompany your playback picture. According to the menu access
explanation on pg. 50, select “SOUND MODE” or “12BIT MODE” from the Menu Screen and set it to the
desired parameter.
NOTES:
●
The “SOUND MODE” setting is available for both 12-bit and 16-bit sound. (In previous models’ functions,
“12-bit” is called “32 kHz” and “16-bit” is called “48 kHz”.)
●
The camcorder cannot detect the sound mode in which the recording was made during fast-forward or
rewind. During playback the sound mode is displayed in the upper left corner.
SOUND MODE
12BIT MODE
: Factory-preset
STEREO
SOUND L
SOUND R
MIX
SOUND 1
SOUND 2
Sound is output on both “L” and “R” channels in stereo.
Sound from the “L” channel is output in stereo.
Sound from the “R” channel is output in stereo.
Original and dubbed sounds are combined and output in stereo on
both “L” and “R” channels in stereo.
Original sound is output on both “L” and “R” channels in stereo.
Dubbed sound is output on both “L” and “R” channels in stereo.
Each setting is linked with “ DISPLAY” or
“ SYSTEM”, which appears when the Power
Switch is set to “ ” (੬ pg. 48, 49).
The parameters are the same as in the
description on pg. 48, 49.
Menu Screen Explanations (cont.)
੬ pg. 28 – 36
(GR-DVL915/DVL815/DVL510 only)
MEMORY
DISPLAY
SYSTEM
12
BI T /SOUND
1
SP
4
6
DEC
5:
2
3
5
0
’0
P
1
M
12:34:24
DEC
25 ’01
1
/
50
100
-
0001
Minutes
Seconds
For playback sound, tape
speed and tape running
during video playback.
For date/time during
video playback.
DISPLAY
For date during D.S.C.
playback (GR-DVL915/
DVL815/DVL510 only).
For directory, file name,
index number and total
number during D.S.C.
playback (GR-DVL915/
DVL815/DVL510 only).
ON SCREEN setting:
DATE/TIME setting:
Frames*
*30 frames = 1 second
TIME CODE setting: For time code.