Filter
Top Products
8
Introduction
Camera
A
Mounting hole (elliptical) x 4
Use these when mounting the camera to the
NOTE:
electrical box. (A pg. 18)
When installing the camera onto the electric
box, install it using the supplied adaptor ring.
B Mounting hole (round) x 4
Use these when mounting the camera to the
ceiling or wall. (A pg. 14, 16)
C Outer Case
Use this in the following cases:
●When mounting the camera directly to the
ceiling or on the wall. (A pg. 16)
●When mounting the camera to the electrical
box. (A pg. 18)
D Dome Cover
The dome cover is fragile. Take care when
handling it.
E Inner Dome
Before mounting the camera, remove it and
perform switch setting and image angle
setting. (A pg. 14, 16)
F Wiring Hole
Break and use this when drawing the cable
from the camera unit without drilling a hole in
the ceiling. (A pg. 18)
G Input Power cable
DC 12 V Input: Red (+12 V), Black (GND)
AC 24 V Input: Non-polar. (A pg. 12)
H Protection Cover
Upon connecting the coaxial cable, protect it
by insulating the metal part of the BNC
connector from the ceiling structure.
I Video signal output connector (BNC)
(A pg. 12)
Name of Parts
B
D
C
A
I
H
G
A
F
B
B
E
TK-C215V4_EN.book Page 8 Wednesday, June 14, 2006 8:00 PM