Filter
Top Products
12
Names of parts and their functions (continued)
Output level control section
4
SHUTTER UP/SHUTTER DOWN button
Using the [SHUTTER UP] / [SHUTTER DOWN] button, the
following setting is possible: 1/60, 1/100, 1/175, 1/250, 1/375,
1/500, 1/1000, 1/2000, 1/4000, 1/10000.
Enabled only when [GAIN] switch
1
is set to [MANUAL].
Flicker-free mode
Prevents flickering caused by fluorescent lighting in area with
50 Hz.
When the shutter speed is set at 1/100 sec (flicker-free
mode), flickering is eliminated.
• When looking at the picture on the monitor while the
electronic shutter is being used, the object movement
appears to be discontinuous.
For example: in shutter speed of 1/2000 sec. Since the
image for 1/2000 sec is taken out every 1/60 sec, this
phenomenon occurs.
• When high-speed shutter is used, light may not be suffi-
cient.
ON I
O
OFF
POWER
CAMERA
SETTING
RED BLUE
WHITE BALANCE
AUTO MANUAL ON OFF
ENHANCE FREEZE BAR
MENU SETTING
GAIN SHUTTER
OUTPUT LEVEL
ADJUST
AUTO MANUAL
GAIN SHUTTER
OUTPUT LEVEL
ADJUST
AUTO MANUAL
3 4
2
1
1
GAIN switch
[AUTO]
Adjusts gain automatically.
In this mode, the [GAIN UP]/[GAIN DOWN] button
3
and
[SHUTTER UP]/[SHUTTER DOWN] button
4
operations are
disabled.
[MANUAL]
Set to this position when adjust the [GAIN] and [SHUTTER]
manually.
2
ADJUST volume
Set the brightness during auto sensitivity adjustment.
Enabled only when [GAIN] switch
1
is set to [AUTO].
3
GAIN UP/GAIN DOWN button
[GAIN UP]
Each time this button is pressed, the gain increases by 1 dB.
[GAIN DOWN]
Each time this button is pressed, the gain decreases by 1 dB.
Enabled only when [GAIN] switch
1
is set to [MANUAL].
Setting from -3dB to +24dB is possible.