Filter
Top Products
9
Charge the battery connecting to the computer with the USB cable.
1
Press the
<
button to turn o the camcorder.
The power lamp goes out.
2
Connect the camcorder to a computer.
Camcorder’s LCD monitor will turn o when the USB cable is connected.
This occurs during battery charging or when connected to a PC.
Charge lamp
turns on: Charging
goes out: Charging nished
Charging time approx. 180 minutes
When the charging is nished, disconnect the camcorder from the computer.
NOTE
• Charging is not possible while the camcorder is turned on.
• Make sure that the computer is turned on during charging.
• The camcorder is not charged when it is shipped. Charge the camcorder before using it for
the rst time.
• If there is a trouble in charging, the charge lamp/warning lamp blinks in green. Connect the
camcorder to the computer again.
Battery Indicator 8
Fully charged
Medium
Very low
Recharge the battery at an early opportunity.
Blinking
Empty
The camcorder will turn o. Recharge the battery immediately.
Charging
Charge Lamp
< Button
Power Lamp
USB Connector
USB Cable
To Computer