Filter
Top Products
EN45
1 3 2
IN OUT IN OUT IN OUT
AUTOMATIC EDITING TO VCR
9
PREPARE SOURCE TAPE
Rewind the tape in the camcorder to the beginning of
the scene you want to edit and press PAUSE.
10
ENGAGE VCR’S RECORD-PAUSE MODE
Point the remote control towards the VCR’s infrared
sensor and press VCR REC STBY, or manually engage
the VCR’s Record-Pause mode.
11
BEGIN AUTOMATIC EDITING
Press MENU/DISPLAY on the camcorder, and the
previously selected scenes are copied to the VCR in
the specified order.
While editing, the R.A. Edit counter of the scene
which is being copied is shown with a blinking
highlight.
•Pressing START/STOP on the remote control does
not start editing.
12
END AUTOMATIC EDITING
When all selected scenes have been copied, the
camcorder and VCR enter the Still or Pause mode.
Press STOP on both units. To make the R.A. Edit
counter display disappear, press ON/OFF.
•When finished editing, be sure to disconnect the
editing cable and the audio/video cable.
NOTES:
●
If you performed step 1 on page 43 (“MAKE CONNEC-
TIONS”), keep the remote control pointed at the VCR during
editing.
●
The on-screen display only appears while the camcorder
searches for each scene.
●
There may be noise at in- or out-points on the edited tape
with certain VCRs.
RM-V700U
(provided with
GR-AX501/AX401,
optional for
GR-AX301/
AX201)
Edited tape (VCR)
Original tape (camcorder)
Recording
Start/Stop
Button
PAUSE (6) Button
STOP (5) Button
Power Switch
REW (
2
) Button
Remote Sensor
VCR REC STBY
ON/OFF
Using the RM-V700U, it is also possible to perform deck-to-deck
Random Assemble Editing. The playback deck must be an R.A. Edit-
capable JVC VCR. The recording deck can be...
Ⅲ a VCR other than JVC, or
Ⅲ a JVC VCR which has neither a Remote PAUSE nor an R.A. EDIT
connector
How to use:
— Connect the playback deck and RM-V700U as shown on the left.
— Set the RM-700U to correspond to the brand of the recording
deck. (
੬ pg. 42)
— For Random Assemble Editing procedure, please refer to the
instruction manual of the JVC VCR you are using as the playback
deck.
Notes:
Ⅲ RM-V700U cannot be used to control the playback deck.
Ⅲ RM-V700U is capable of controlling basic operations of the
recording deck. While pressing VCR CTL, press PLAY, STOP,
PAUSE, FF or REW for these functions. (Not possible with some
brands and models). Other buttons cannot be used.
Ⅲ To put the recording deck in the Record-Pause mode, use the
controls on the recording deck itself.
SUPPLEMENTAL INFORMATION ON THE REMOTE CONTROL
Recording deck
Player (JVC VCR)
RM-V700U*
AV OUT
To R.A. EDIT Editing cable*
To PAUSE IN
AV IN
MENU/DISPLAY
Button
*Provided with
GR-AX501/AX401,
optional for
GR-AX301/AX201.