Filter
Top Products
32
A
B
C
EDITING (cont.)
PREPARE CAMCORDER
2
Insert a recorded tape and set the power switch to
PLAY.
PREPARE VCR
3
Turn the power on, insert a recordable tape and
engage the AUX mode (refer to VCR’s instructions).
SELECT SCENES
ACCESS R.A. EDIT COUNTER
DISPLAY
1
Press PLAY/PAUSE, then press R.A. EDIT and the
counter display appears in the viewfinder and the
screen of the connected TV.
REGISTER BEGINNING OF SCENE
2
Press REW or FF to locate the beginning of a scene
you want, then press IN/OUT to register that point.
The data appears under IN on the display.
REGISTER END OF SCENE
3
Press REW or FF to locate the end of the scene and
press IN/OUT to register it. The data appears under
OUT on the display. The total time of the registered
scene(s) is displayed at the bottom of the screen.
REGISTER ADDITIONAL SCENES
4
Repeat steps 2 and 3 for each additional scene
(as many as 8).
MAKE CORRECTIONS
5
Press CANCEL during steps 2 and 3 to erase the
most recently registered point.
NOTES:
●
The RM-V704U can be used to operate other camcorder
functions as well. Point the RM-V704U at the camcorder’s
remote sensor and press any of the following buttons (function
appears in parentheses):
— ON/OFF (camcorder R.A. EDIT)
— IN/OUT (camcorder IN/OUT)
— CANCEL (camcorder CANCEL)
●
There must be at least one second between an in-point and its
corresponding out-point.
●
The camcorder prerolls during R.A. Edit, so there must be at
least 15 seconds of recording material prior to any in-point.
●
Blank portions of tape cannot be registered as in-points or out-
points.
●
If it takes more than 5 minutes to search for an in-point, the
VCR’s Record-Pause mode is cancelled and editing doesn’t
take place.
●
Pressing R.A. EDIT clears all in- and out-points from memory.
●
Leave a small margin for error around each in-point to ensure
the scene is recorded in its entirety.
CANCELREW/FF
IN/OUT
PLAY/PAUSE
STOP
R.A. EDIT
VCR (Recording deck)
To EDIT
To AUDIO and
VIDEO IN
connectors
If your TV/VCR has
the SCART
connector, use the
provided cable
adapter.
To Pause-In
To Remote
PAUSE
To AUDIO and
VIDEO out
connector
Editing cable
(provided)
A/V cable
(provided)
ON/OFF
VCR REC STBY
CANCEL
IN/OUT
RM-V704U
(provided with GR-AX460,
optional for GR-AX360/AX260)
IN OUT
ᮣ 1 0:00:25
ᮣ 2
ᮣ 3
ᮣ 4
ᮣ 5
ᮣ 6
ᮣ 7
ᮣ 8
COUNTER 0:00:25
TOTAL 0:00:00
IN OUT
ᮣ 1 0:00:25 0:01:05
ᮣ 2 0:03:18 0:03:31
ᮣ 3 0:02:33 0:02:53
ᮣ 4 0:04:11
ᮣ 5
ᮣ 6
ᮣ 7
ᮣ 8
COUNTER 0:04:11
TOTAL 0:01:13