Filter
Top Products
66
EN
Using The Camcorder As A WebCam
(GR-DVL1020 only)
This camcorder can be used as a WebCam via USB
connection.
1 Make sure all necessary software (provided) are
installed in your PC and all units are turned off.
2 Connect the camcorder to your PC using the USB
cable.
3 Set the VIDEO/MEMORY Switch to “MEMORY”
and set the Power Switch to “
AUTO
” or “
MANUAL
”,
then turn on the PC.
• “Web CAMERA” appears on the screen.
• If the PC is not powered on, the camcorder does not
enter the Web Camera mode.
4 When finished, turn off the PC first, then the
camcorder. Disconnect the USB cable from the
camcorder and PC.
NOTES:
● It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
੬ pg. 9).
● Use the provided software PIXELA ImageMixer to
capture video in real-time.
● You can also use the camcorder for webconference by
using Windows
®
Microsoft Netmeeting and signing up
for Microsoft Hotmail.
● In the Web Camera mode, the following buttons cannot
be operated: E-MAIL, SNAPSHOT, the Recording
Start/Stop button.
b CAMERAeW bCAMERAeW
P
C
To USB
connector
USB cable
(provided)
To USB
Power Switch
USB-equipped PC
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
Display
SYSTEM CONNECTIONS
(cont.)
Refer to the instruction manuals of the PC and
provided Software.