Filter
Top Products
EN61
VCR CODE LIST
MITSUBISHI
NEC
GRUNDIG
HITACHI
PANASONIC
JVC
BLAUPUNKT
AKAI
FERGUSON
SAMSUNG
DAEWOO
LG/GOLDSTAR
A
B
C
VCR BRAND
NAME
BUTTONS
(A) (B)
SANYO
SHARP
TOSHIBA
SONY
THOMSON,
TELEFUNKEN,
SABA,
NORDMENDE
SELECO,
REX
PHILIPS
VCR BRAND
NAME
BUTTONS
(A) (B)
MBR SET
SHIFT
Random Assemble Editing [R.A.Edit]
Create edited videos easily using your camcorder as
the source player. You can select up to 8 “cuts” for
automatic editing, in any order you like. R.A.Edit is
more easily performed when the MBR (Multi-Brand
Remote) is set to operate with your brand of VCR (see
VCR CODE LIST), but can also be performed by
operating the VCR manually.
Before operation, make sure the batteries are installed
in the remote control (੬ pg. 57).
SET REMOTE/VCR CODE
1
Turn off the power to the VCR and point the
remote towards the VCR’s infrared sensor. Then,
referring to the VCR CODE LIST, press and hold
MBR SET, and press button (A) and then (B).
The code is automatically set once you release
MBR SET, and the VCR’s power comes on.
2
Make sure the VCR’s power is on. Then, while
holding SHIFT, press the button on the remote
for the desired function. The functions the
remote can control are PLAY, STOP, PAUSE, FF,
REW and VCR REC STBY (you do not need to
press SHIFT for this one).
You are now ready to try Random Assemble
Editing.
IMPORTANT
Although the MBR is compatible with JVC VCRs and
those of many other makers, it may not work with
yours or may offer limited functions.
NOTES:
●
If the VCR’s power does not come on in step 1, try
another code from the VCR CODE LIST.
●
Some brands of VCR do not come on automati-
cally. In this case, turn the power on manually and
try step 2.
●
If the remote control is not able to control the VCR,
use the controls on the VCR.
●
When the remote control’s batteries run out, the
VCR brand you have set will be erased.
In that case, replace the old battery with a new one
to reset the VCR brand.
VCR (Recording deck)
CONTINUED ON NEXT PAGE