Filter
Top Products
EN11
OF
F
FADER
/ W I PE
AM AEPROGR
ACAMER
LMANUA
MSYSTE
DSC
END
AYDISPL
C
AN E
W. BAL
RE NEON SC
LCD/TV
UAOT
IMETDATE/
T I ME CODE
CLOCK
ADJ .
–
–
– FFO
25 ’01
CED
30
PM
:5
NRETUR
CLOCK
ADJ .
25 ’01
CED
30
PM
:5
P
L
A
Y
O
F
F
Date/Time Settings
The date/time is recorded onto the tape at all times, but its
display can be turned on or off during playback
(੬ pg. 42, 43).
1
Set the Power Switch to “ ” while pressing down
the Lock Button located on the switch, then open
the LCD monitor fully or pull out the viewfinder
fully. The power lamp lights and the camcorder is
turned on.
2
Press the MENU Wheel in. The Menu Screen
appears.
3
Rotate the MENU Wheel to select “ DISPLAY”.
Press it and the DISPLAY Menu appears.
4
Rotate the MENU Wheel to select “CLOCK ADJ.”.
Press it and “month” is highlighted.
Rotate the MENU Wheel to input the month. Press
it. Repeat to input the day, year, hour and minute.
Rotate the MENU Wheel to select “ RETURN”, and
press it twice. The Menu Screen closes.
NOTE:
Even if you select “CLOCK ADJ.”, if the parameter is not
highlighted the camcorder’s internal clock continues to
operate. Once you move the highlight bar to the first
date/time parameter (month), the clock stops. When you
finish setting the minute and press the MENU Wheel in,
the date and time begin operation from the date and time
you have just set.
Display
MENU Wheel
Power Switch
Lock Button
DISPLAY Menu
Power lamp
GR-DVM75 only