JVC GR-D280 Digital Camera User Manual


 
EN 23
VIDEO PLAYBACK
MasterPage: Start_Right
VIDEO RECORDING & PLAYBACK
The Full-Function Remote Control Unit can
operate this camcorder from a distance as well
as the basic operations (Playback, Stop, Pause,
Fast-Forward and Rewind) of your VCR. It also
makes additional playback functions possible.
(pg. 24)
Installing The Battery
The remote control uses
one lithium battery
(CR2025).
1 Pull out the battery
holder by pushing the lock
tab.
2 Insert the battery in the
holder, and be sure to
have the “+” mark visible.
3 Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
When using the remote
control, be sure to point it
at the remote sensor.
The transmitted beam’s
approximate effective
distance for indoor use is
5m.
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons And Functions
A Infrared beam transmitting window
Transmits the beam signal.
The following buttons are available only when
the camcorder’s Power Switch is set to “PLAY”.
B PAUSE Button
Pauses the tape (pg. 24)
Up Button (pg. 24)
C SLOW Rewind Button (pg. 24)
D REW Button
Rewind/Reverse Shuttle Search on a tape
(pg. 21)
Displays previous file in a memory card
(pg. 26)
Left Button (pg. 24)
E INSERT Button (pg. 46)
F SHIFT Button (pg. 24)
G DISPLAY Button (pg. 22, 43)
H SLOW Forward Button (pg. 24)
I PLAY Button
Starts Playback of a tape (pg. 20)
Starts Auto Playback of images in a memory
card (pg. 27)
J FF Button
Forward/Forward Shuttle Search on a tape
(pg. 21)
Displays next file in a memory card (pg. 26)
Right Button (pg. 24)
K A. DUB Button (pg. 46)
L STOP Button
Stops the tape (pg. 20)
Stops Auto Playback (pg. 27)
Down Button (pg. 24)
M EFFECT Button (pg. 24)
N EFFECT ON/OFF Button (pg. 24)
The following buttons are available when the
camcorder’s Power Switch is set to “A” or “M”.
o Zoom (T/W) Buttons
Zoom in/out (pg. 19, 24)
(Also available with the Power Switch set to
“PLAY”)
p START/STOP Button
Functions the same as the Recording Start/
Stop Button on the camcorder.
q S.SHOT Button
Functions the same as SNAPSHOT on the
camcorder.
(Also available with the Power Switch set to
“PLAY”)
Playback Using The Remote
Control
1
1
2
3
Lock tab
Remote sensor
GR-D280PAL.book Page 23 Saturday, January 22, 2005 4:09 PM