Filter
Top Products
FEATURES FOR RECORDING
36 EN
MasterPage: Left
Like the pupil of the human eye, the iris
contracts in well-lit environments to keep too
much light from entering, and dilates in dim
environments to allow in more light.
Use this function in the following situations:
●
When shooting a moving subject.
● When the distance to the subject changes (so
its size in the LCD monitor or the viewfinder
changes), such as when the subject is backing
away.
● When shooting on a reflective natural
background such as at the beach or when
skiing.
● When shooting objects under a spotlight.
● When zooming.
1 Perform steps 1 - 6 in “Exposure Control”
(੬ pg. 35)
2 Adjust zoom so that the subject fills the
LCD monitor or the viewfinder, then press and
hold SET or
2 for over 2 seconds. The “”
indication appears.
3 Press SET or 2. The iris is locked.
4 Press MENU.
Backlight compensation brightens the subject
quickly.
With simple operation, backlight compensation
feature brightens the dark subject portion by
increasing the exposure.
1 Set the Power Switch to
“REC”.
2 Set the recording mode to
“ ”. (੬ pg. 20)
3 Press so that the
Backlight Compensation
indicator “” appears.
To cancel Backlight Compensation
Press twice so that the “” indicator
disappears.
NOTE:
Using Backlight Compensation may cause the
light around the subject to become too bright and
the subject to become white.
Selection of a spot metering area enables
more precise exposure compensation.
1 Set the Power Switch to “REC”.
2 Set the recording mode to “ ”. (੬ pg. 20)
3 Press twice so that the Spot Exposure
Control indicator “” appears.
●
A spot metering area frame appears at the
center of the LCD monitor/viewfinder.
4 Press SET.
●
Spot Exposure Control is engaged.
● Exposure is adjusted to make the brightness of
the selected area most appropriate.
To lock the iris
After step 3, press and hold SET over 2
seconds. The “” indication appears and the
iris is locked.
To cancel Spot Exposure Control
Press once so that the “” indicator
disappears.
NOTES:
● Depending on the shooting location and
condition, optimum result may not be attained.
● “STROBE” in “EFFECT” cannot be used with
Spot Exposure Control.
Iris Lock
Backlight Compensation
SET
Spot Exposure Control
GR-D770UC_EN.book Page 36 Thursday, December 14, 2006 7:55 PM