Filter
Top Products
EN 41
Connections/Editing
ENGLISH
1
2
6
3
4
Dubbing To Or From A Video
Unit Equipped With A DV
Connector (Digital Dubbing)
It is also possible to copy recorded scenes
from the camcorder onto another video unit
equipped with a DV connector. Since a digital
signal is sent, there is little, if any, image or
sound deterioration.
To use this camcorder as a player
1
Make sure all units are turned off.
22
Connect this camcorder to a video unit
equipped with a DV input connector using
a DV cable as shown in the illustration.
3
Start playback on the camcorder (੬ 21).
44
At the point you want to start dubbing, start
recording on the video unit. (Refer to the
video unit’s instruction manual.)
55
To stop dubbing, stop recording on the
video unit, then stop playback on this
camcorder.
Notes:
• It is recommended to use the AC Adapter
as the power supply instead of the battery
pack (੬ 16).
• If a blank portion or disturbed image is played
back on the player during dubbing, the dubbing
may stop so that an unusual image is not
dubbed.
• Even though the DV cable is connected
correctly, sometimes the image may not
appear in step
44
. If this occurs, turn off the
power and make connections again.
• If SNAPSHOT is pressed during playback, only
the original playback image recorded on the
tape is output from the DV IN/OUT connector.
• When using a DV cable, be sure to use the
optional JVC VC-VDV204U or VC-VDV206U
DV cable.
To use this camcorder as a recorder
1
Make sure all units are turned off.
22
Connect this camcorder to a video unit
equipped with a DV output connector using
a DV cable as shown in the illustration.
3
Set the camcorder’s Power Switch to “PLAY”.
4
Set “REC MODE” to “SP” or “LP” (੬ 30).
5
Start playback on the player.
66
Press the Recording Start/Stop Button to
engage the Record-Pause mode.
• The “ ” indication appears on the
screen.
77
At the point you want to start dubbing,
press the Recording Start/Stop Button to
start dubbing. The T indication rotates.
88
Press the Recording Start/Stop Button
again to stop dubbing. The T indication
stops rotating.
99
Press 8 to return to the normal playback
mode.
Note:
Digital Dubbing is performed in the sound mode
recorded on the original tape, regardless of the
current “SOUND MODE” setting (੬ 30).
To DV IN/OUT
DV cable (optional)
Core fi lter
Video unit equipped with DV connector
COPY PROTECTED
Appears if dubbing of copyguarded signals is
attempted while this camcorder is being used
as a recorder.
To DV IN/OUT
Core fi lter
GR-D850&870UB_EN.indb 41GR-D850&870UB_EN.indb 41 11/28/2007 10:08:30 AM11/28/2007 10:08:30 AM