Filter
Top Products
EN 21
Tape Remaining Indicator
The time remaining on the tape is automatically
monitored and displayed in the viewfinder
(੬ pg. 60). When the tape ends, “TAPE END”
appears in the viewfinder.
Re Shoot A Scene
If you aren’t pleased with a scene you just recorded, you
can easily return to the beginning and record it again.
Please do not change operation mode. If you
change the mode from Rec. to Play, this function
will be rejected.
1
ENGAGE RECORD/STANDBY MODE
Press RECORDING START/STOP, then press RE
SHOOT. The tape returns automatically to the
starting point of the most recent recording, and
the camcorder enters RECORD/STANDBY mode.
•If, after the tape has rewound to the
beginning of the scene, you decide you don’t
need to re-record, press CAN. The tape auto-
matically fast-forwards to the end of the scene.
REC
30min
29 min
3 min
2 min
blinking
1 min
blinking
0 min
blinking
STOP
PLAY
/PAUSE
Stable Shooting Positions
Before pressing RECORDING START/
STOP, ZOOM or SNAP SHOT, be sure to
hold the camcorder with both hands.
For low
shooting
Feet set slightly
apart with your
body turned
toward the
subject
Fasten hand strap around wrist
Lean against a wall
or pole for support
RE SHOOT
CAN.