JVC GR-DVL512 Camcorder User Manual


 
EN73
CONTINUED ON NEXT PAGE
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
9.
The color of Snapshot looks
strange.
10.
The image taken using
Snapshot is too dark.
11.
The image taken using
Snapshot is too bright.
12.
Digital Zoom does not work.
13.
The Black & White Fader
does not work.
14.
The Dissolve function does
not work.
15.
The Picture Wipe and
Dissolve functions do not
work.
9.
The light source or the subject
does not include white. Or
there are various different
light sources behind the
subject.
The Sepia or Monotone mode
is activated.
10.
Shooting was performed
under backlit conditions.
11.
The subject is too bright.
12.
10X optical zoom is selected.
•“PROGRAM AE is set to
VIDEO ECHO in the Menu
Screen.
Picture Wipe or Dissolve are
being used in a scene
transition.
13.
The Sepia or Monotone mode
is activated.
14.
The Sepia, Monotone or Slow
Shutter mode of Program AE
with special effects is
activated.
•“WIDE MODE is set to
SQUEEZE in the Menu
Screen.
The previously selected mode
of Program AE with special
effects was changed after the
last selected scene for editing
was registered.
15.
The last selected editing scene
is ending.
At the end of the last selected
scene for editing, the Power
Switch was set to OFF.
The power is off.
9.
Find a white subject and
compose your shot so that it
also appears in the frame
( pg. 26, 42).
Turn off Sepia and Monotone
( pg. 38, 39).
10.
Press the BACKLIGHT Button
( pg. 44).
11.
Set PROGRAM AE to
SPOTLIGHT in the Menu
Screen ( pg. 38).
12.
Set ZOOM to 40X or
400X in the Menu Screen
( pg. 47).
Disengage the VIDEO
ECHO mode ( pg. 18, 39).
Wait until the Picture Wipe or
Dissolve effects are completed
( pg. 18, 40).
13.
Turn off Sepia and Monotone
( pg. 38, 40).
14.
Turn off Sepia, Monotone or
Slow Shutter before adding
Dissolve to a scene transition
( pg. 38, 40).
Set WIDE MODE to
CINEMA or OFF mode
( pg. 48).
Make sure you have selected
the mode of Program AE with
special effects you want before
starting editing ( pg. 38, 40).
15.
Select Picture Wipe or
Dissolve before beginning
recording. The effects are then
automatically activated
( pg. 40).
Do not turn off the
camcorders power after
setting Edit-In and Edit-Out
points, as they will all be
erased ( pg. 40).
The camcorder automatically
shuts off after 5 minutes have
elapsed in the Record-
Standby mode. Make sure you
continue operations within
5 minutes after engaging
Record-Standby mode
( pg. 40).