JVC GR-DVL512 Camcorder User Manual


 
EN75
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
26.
•“TIME CODE is set to OFF
in the Menu Screen.
27.
In places subject to low
temperature, images become
dark due to the characteristics
of the LCD monitor. When
this happens, the displayed
colors differ from those that
are actually recorded. This is
not a defect of the camcorder.
When the LCD monitor's
fluorescent light reaches the
end of its service life, images
on the LCD monitor become
dark. Consult your nearest
JVC dealer.
28.
The light used to illuminate
the LCD monitor causes it to
become hot.
29.
This may occur when the
surface or the edge of the LCD
monitor is pressed.
30.
Certain Fade/Wipe effects,
certain modes of Program AE
with special effects, DIS and
other functions that cannot be
used together are selected at
the same time.
31.
The LCD monitor and the
viewfinder are made with
high-precision technology.
However, black spots or
bright spots of light (red, green
or blue) may appear
constantly on the LCD
monitor or the viewfinder.
These spots are not recorded
on the tape. This is not due to
any defect of the unit.
(Effective dots: more than
99.99 %)
32.
This is normal.
33.
The Power Switch is set to
or .
34.
The Power Switch is set to
or .
The VIDEO/DSC Switch is set
to VIDEO.
26.
Set TIME CODE to ON in
the Menu Screen
( pg. 49, 50).
27.
Adjust the brightness and
angle of the LCD monitor
( pg. 16, 17).
28.
Close the LCD monitor to turn
it off or set the Power Switch
to OFF, and let the unit cool
down.
29.
————
30.
Re-read the sections covering
Fade/Wipe effects, Program
AE with special effects and
DIS ( pg. 38 41, 48).
31.
————
32.
————
33.
Set the Power Switch to
( pg. 21).
34.
Set the Power Switch to
( pg. 28).
Set the VIDEO/DSC Switch to
.
26.
The indicators and messages
do not appear.
27.
Images on the LCD monitor
appear dark or whitish.
28.
The rear of the LCD monitor
is hot.
29.
The indicators and the image
color on the LCD monitor
are not clear.
30.
The LCD monitor or
viewfinder indications blink.
31.
Colored bright spots appear
all over the LCD monitor or
the viewfinder.
32.
During recording, sound
cannot be heard.
33.
Play, Rewind and Fast-
Forward functions do not
work.
34.
A memory card cannot be
played back.
CONTINUED ON NEXT PAGE