Filter
Top Products
28
EN
FF
REW
Normal Playback
Images shot with the camcorder are automatically
numbered, then stored in numerical order on the
memory card. You can view the stored images, one at
a time, much like flipping through a photo album.
1 Load a memory card (੬ pg. 14).
2 Set the VIDEO/MEMORY Switch to “MEMORY”,
then set the Power Switch to “PLAY” while pressing
down the Lock Button.
•A stored image is displayed.
3 Press
3
to display the next image.
Press
2
to display the previous image.
•Pressing INFO gives you details on the displayed
image (੬ pg. 29, “Viewing File Information”).
•You can also overview several images at a time
(੬ pg. 29, Index Playback).
•You can turn off the on-screen playback display
(੬ pg. 29, “Removing On-Screen Display”).
Auto Playback
You can run through all the images stored in memory
automatically.
1 Perform steps 1 and 2 above.
2 Press
4
/6.
•If you press
2
during Auto Playback, images are
displayed in descending order.
•If you press
3
during Auto Playback, images are
displayed in ascending order.
3 To end Auto Playback, press 5.
NOTES:
● Even if you shoot a new image after playing back a low-
numbered one, this will not overwrite an existing image,
because new images are automatically stored after the
last-recorded one.
● Images shot in a file size other than VGA/XGA with
devices that are compatible with DCF (Design rule for
Camera File system) will be displayed as reduced-size
thumbnail images. These thumbnail images cannot be
transferred to a PC.
● Images shot with devices (such as JVC GR-DVM70)
that are not compatible with DCF cannot be viewed with
this camcorder; “UNSUPPORTED FILES” will be
displayed.
M
A
N
U
A
L
AUTO
PLAY
OFF
[For Normal Playback]
To display the next image
Display
[For Auto Playback]
To display the
previous image
Power Switch
Lock Button
Rewind Button (
2
)
Fast-Forward Button
(
3
)
Play/Pause Button
(
4
/6)
Stop Button (5)
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
MEMORY CARD PLAYBACK