Filter
Top Products
EN 79
Master Page: Right
GR-DVX709SH_37-79.fm Page 79
This camcorder can be used as a WebCam via USB
connection.
1 Make sure all necessary software (provided) are
installed in your PC and all units are turned off.
2 Connect the camcorder to your PC using the USB
cable.
3 Set the VIDEO/MEMORY Switch to “MEMORY”.
4 Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
5 Turn on the PC.
● “Web CAMERA” appears on the screen.
● If the PC is not
powered on, the
camcorder does not
enter the Web
Camera mode.
6 When finished, turn
off the PC first, then
the camcorder.
Disconnect the USB cable from the camcorder
and PC.
NOTES:
● It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
(੬ pg. 11)
● Use the provided software PIXELA ImageMixer to
capture video in real time.
● You can also use the camcorder for web
conference by using Microsoft Windows
®
NetMeeting
®
and signing up for MSN Hotmail.
● In the Web Camera mode, the following buttons
cannot be operated: E-MAIL, SNAPSHOT, the
Recording Start/Stop Button.
Using The Camcorder As A
WebCam (GR-DVX709 only)
VIDEO/MEMORY
Switch
Open the
connector cover.
To USB
To USB connector
USB cable
(provided)
USB-equipped PC
Refer to the instruction manuals of the PC and
provided Software.
b CAMERAeW bCAMERAeW
P
C
GR-DVX709SH_37-79.fm Page 79 Saturday, February 23, 2002 6:06 PM