Filter
Top Products
MENUS FOR DETAILED ADJUSTMENT
36 EN
MasterPage: Left
OFF: Automatic demonstration will not take
place.
[ON]: Demonstrates certain functions such as
program AE or special effects, etc., and can be
used to confirm how these functions operate.
Demonstration starts in the following cases:
● When the menu screen is closed after “DEMO
MODE” is turned “ON”.
● With “DEMO MODE” set to “ON”, if there is no
operation for about 3 minutes after the power
switch is set to “A” or “M”.
● Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
NOTES:
● If a cassette is in the camcorder, the
demonstration cannot be turned on.
● “DEMO MODE” remains “ON” even if the
camcorder power is turned off.
● If “DEMO MODE” remains “ON”, some functions
will not be available. After viewing demo, set to
“OFF”.
EXECUTE: Resets all settings to the factory-
preset.
[RETURN]: Does not reset all settings to the
factory-preset.
CAMERA DISPLAY
● The “n” (CAMERA DISPLAY) settings are
effective even when the power switch is set to “A”.
However, the menu settings can be changed only
when the power switch is set to “M”.
● The “n” (CAMERA DISPLAY) settings except
“BRIGHT”, “LANGUAGE” and “AUX MIC” are
effective only for shooting.
[ ] = Factory-preset
੬ pg. 16, “Brightness Adjustment of the
Display”
LCD: Keeps the camcorder’s display (except the
date, time and time code) from appearing on the
connected TV screen.
[LCD/TV]: Makes the camcorder’s display
appear on screen when the camcorder is
connected to a TV.
OFF: The date/time does not appear.
[AUTO]: Displays the date/time for approx. 5
seconds when the power switch is set from
“OFF” to “A” or “M”.
ON: The date/time is always displayed.
● The date indication can also be turned on/off by
pressing the DISPLAY button on the remote
control. (੬ pg. 22, 46)
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder
and on the connected TV. Frame numbers are
not displayed during recording. (੬ pg. 19)
/ []*/ [ENGLISH] / FRANÇAIS /
DEUTSCH / ESPAÑOL / ITALIANO /
NEDERLANDS / PORTUGUÊS / РУССКИЙ /
/
The language setting can be changed.
(੬ pg. 15)
* GR-X5AC/AH only
OFF: Auxiliary microphone level indicator does
not appear.
[ON]: Displays auxiliary microphone level
indicator when optional microphone is
connected. (੬ pg. 12)
੬ pg. 15, “Date/Time Settings”
DSC
[ ] = Factory-preset
[FINE] / STANDARD
The picture quality mode can be selected to best
match your needs. Two picture quality modes
are available: FINE ( ) / STANDARD ( ) (in
order of quality).
NOTE:
The number of storable images depends on the
selected picture quality as well as the composition
of the subjects in the images and the type of
memory card being used. (੬ pg. 61)
DEMO MODE
CAM RESET
BRIGHT
ON SCREEN
DATE/TIME
TIME CODE
LANGUAGE
AUX MIC
CLOCK ADJ.
QUALITY
GR-XASIA_11Advanced.fm Page 36 Wednesday, April 13, 2005 10:02 AM