JVC GY-HD110 Camcorder User Manual


 
59
USING EXTERNAL COMPONENTS
CAUTION
Set the IEEE1394 switch on both devices to either HDV
or DV.
Start recording after making sure that both devices are
properly connected.
When Using the GY-HD110U/GY-HD111E
as Recording Unit
(Dubbing From Another Videocassette)
1. Set the IEEE1394 switch on left side of the GY-HD110.
2. Connect the units with the IEEE1394 cable.
3. Turn ON both units.
4. Place the GY-HD110 in the VTR MODE.
Press the CAM/VTR button to turn on the VTR indicator.
5. Set the frame rate.
Set the FRAME RATE item (60/30, 50/25, 24) on the
VIDEO FORMAT menu to match the HDV/DV signal
frame rate input from the IEEE1394 connector.
X See page 64.
6. Set the time code and user bit recording.
Set the TC DUPLI. item on the TC/UB/CLOCK menu
screen. (Only for DV format)
MEMO
In HDV format, the TC/UB set in the camcorder is recorded
regardless of the setting.
7. Insert the videocassettes.
8. Start playback on the playback unit.
For details, see the instructions to the unit used for play-
back.
The playback picture from the playback unit appears on
the GY-HD110’s LCD monitor and viewfinder screen.
9. Press the REC/VTR trigger button on the GY-HD110 to
start recording.
To temporarily pause the recording, press the REC or
VTR trigger button.
To restart the recording, press the REC or VTR trigger
button again.
10.When dubbing is completed.
Press the REC/VTR trigger button or the STOP button on
the GY-HD110 to stop recording, and then stop playback
on the playback unit.
MEMO
Depending on the player, sound may not be heard momen-
tarily from this unit when switching modes from STILL to
PLAY.
IEEE 1394
HDV
DV
LINE OUTPUT
DC INPUT
VIDEO/Y
IEEE1394
P
R
P
R
IEEE1394 cable
1.
IEEE1394 switch
Signal flow
2.
6.
TC/UB
Date and Time
DV : When dubbing in DV format
HDV : When dubbing in HDV format
OFF : Records the TC/UB set in the
camcorder.
ON : Records the TC/UB for the
IEEE1394 input.
Date and time data : Records the data sent from the
playback device.
GY-HD110 : Insert the videocassette to be
dubbed to.
Playback unit : Insert the recorded videocassette.