Filter
Top Products
58
USING EXTERNAL COMPONENTS
HDV/DV Dubbing
CAUTION
• Set the IEEE1394 switch on both devices to either HDV
or DV.
• Start recording after making sure that both devices are
properly connected.
Connecting the GY-HD110 to another video component
equipped with HDV/DV connector (IEEE1394 standard) using
a IEEE1394 cable (optional) enables dubbing of digital sig-
nals with high picture quality and high-quality sound.
Using the GY-HD110 as the playback unit
(Dubbing to another video)
1. Set the IEEE1394 switch on the left panel of the cam-
corder.
2. Connect the IEEE1394 cable.
3. Turn both devices on.
4. Set the camcorder to VTR mode.
Press the CAM/VTR button. The VTR indicator lights.
5. Set the PB TAPE item on the VIDEO FORMAT menu
screen.
X See page 65.
Select whether to automatically detect the playback tape
video format or play back only a particular format.
Normally, use the “AUTO” setting.
6. Insert a videocassette tape.
7. Press the PLAY/STILL button on this camcorder to start
playback.
8. Start recording on the recording device.
See the recording device user manual for more informa-
tion.
9. When dubbing is finished, stop recording on the recording
device, press the STOP button on the camcorder, and
stop the playback.
MEMO
• Switch the IEEE1394 switch when the camcorder is OFF.
• When you dub still images, they are low resolution
images. Noise may also enter the audio.
• Operations may differ depending on the features and
specifications of the connected device, and operations or
data exchange may not be possible even if the devices
are connected.
• If noise appears on the screen or the audio cuts out, re-
connect the IEEE1394 cable or turn the GY-HD110 on
again.
• If you turn the power to the device connected to the
IEEE1394 connector on and off or switch the video input,
noise may occur in the audio. If you perform this type of
operation, set the speaker volume as low as possible on
the audio device connected to the camcorder.
• Recording may not be possible in some cases even if the
recorder is equipped with a IEEE1394 connector.
IEEE 1394
HDV
DV
LINE OUTPUT
DC INPUT
VIDEO/Y
IEEE1394
P
B
P
R
IEEE1394 cable
1.
IEEE1394 switch
Signal flow
2.
Recording unit
VIDEO FORMAT menu screen
5.
DV : When dubbing in DV format
HDV : When dubbing in HDV format
This camcorder : Recorded videocassette tape
Recording unit : Videocassette you want to dub