Filter
Top Products
75
MENU SCREENS
LCD/VF [2/3] Menu Screen
[1/2] screen is displayed in the VTR mode.
Item Function/Setting (bold characters indicate initial settings)
VIDEO FORMAT Selects whether to display the video format in the status display on the LCD monitor or the viewfinder.
(Camera mode: STATUS 1 screen, VTR mode: STATUS screen)
ON : Displays the video format.
OFF : Does not display the video format.
In camera mode : Displays the video format set in the REC item on the VIDEO FORMAT menu screen.
In VTR mode : Displays the video format recorded on the playback tape or the video format input from the
IEEE1394 connector.
TAPE REMAIN Selects whether or not the remaining tape time (minutes) is shown in the status display on the LCD monitor or in the
viewfinder.
(Camera mode: STATUS 1 screen, VTR mode: STATUS screen)
ON : Displayed.
OFF : Not displayed.
TC/UB Selects whether or not the time code or user’s bits data should be shown in the status display on the LCD monitor
or in the viewfinder.
(Camera mode: STATUS 1 screen, VTR mode: STATUS screen)
OFF : Not displayed.
ON : Displayed.
* Whether the time code or user’s bits data is shown is selected with the TC DISPLAY switch.
AUDIO Selects whether the audio level meters should be shown in the status display on the LCD monitor and the viewfinder
screen.
(Camera mode: STATUS 1 screen, VTR mode: STATUS screen)
OFF : Not displayed.
ON : Displayed.
BATTERY INFO For setting the status display method when loading the Anton-Bauer Battery.
The status will be displayed on the LCD screen and the viewfinder screen.
(In camera mode, only displayed when in status 1 screen.)
VOLTAGE : Indicates battery voltage in 0.1 V steps [V]
CAPA% : Remaining battery is shown in percentage [%]
TIME : Remaining battery is shown in minutes [min]
For batteries other than Anton-Bauer type, only VOLTAGE display is available regardless of the selection.
MEMO
• When TIME or CAPA is selected, the battery indicator displayed before the value changes depending on the
remaining battery level.
}: 12 % or less |: 12 % to less than 50 % {: 50 % or more
• When remaining battery level becomes less than 12%, the display changes to “} RES”.
• When CALIBRATION is required from the battery, the display switches between TIME(CAPA%) display (30 sec-
onds) and “} CAL” display (2 seconds) repeatedly.
• For CALIBRATION, refer to the instruction manual of Anton-Bauer Battery.
• Please use the remaining battery level and remaining time as a reference for shooting duration.
NEXT PAGE Camera mode:
To display the LCD/VF [3/3] menu screen, move the cursor to this position and press the SHUTTER dial.
VTR mode:
To display the LCD/VF [2/2] menu screen, move the cursor to this position and press the SHUTTER dial.
PAGE BACK Camera mode:
When the cursor is in this position, press the SHUTTER dial to return to the LCD/VF [1/3] menu screen.
VTR mode:
When the cursor is in this position, press the SHUTTER dial to return to the TOP MENU screen.