JVC GY-HD110 Camcorder User Manual


 
94
OTHERS
Specifications
[General]
[Camera section]
[VTR section]
[Connectors]
Power requirements : DC 7.2 V, W 2.3 A
Power consumption : Approx. 16.5 W (in the Record mode)
Dimensions : 235 (W) × 232 (H) × 341 (D) mm
Mass : 3.3 d (7.3 lbs.) (including lens
(Th16×5.5BRMU), viewfinder, bat-
tery pack, microphone and tape)
Temperature
Operating : 0°C to 40°C (32°F to 104°F)
Storage : –20°C to 60°C (–4F° to 140°F)
Humidity
Operating : 30% to 80% RH
Storage : 85% RH or less
Image pickup device : 1/3" interline-transfer CCDs
Color separation
optical system
: F1.4, 3-color separation prism
Number of total pixels : Approx. 1,110,000 pixels
Color bars : SMPTE/EBU type Sync system:
Internal sync (built-in SSG)
Lens mount : 1/3" bayonet system
ND filter : 1/4ND, 1/16ND
Gain : 0, 3, 6, 9, 12, 15, 18 dB, ALC
Electronic shutter
Standard value : 59.94 Hz (U model)/50 Hz (E model)
Fixed values : 7.5 - 10,000 Hz, 11 steps (HDV
HD30p/HDV SD60p/DV 60i), 6.25 -
10,000 Hz, 11 steps (HDV HD25p/
HDV SD50p/DV 50i), 6 - 10,000 Hz,
12 steps (HDV HD24p/DV 24p), 6.25
- 10,000 Hz, 11 steps (DV 25p)
Variable scan : 60.19 - 1,998.0 Hz (HDV HD30p/
HDV 60p/DV 60i), 50.17 - 1,982.8 Hz
(HDV HD25p/HDV SD50p/DV 50i),
48.11 - 1,998.0 Hz (HDV 24p), 24.01
- 1,998.0 Hz (DV 24p), 25.04 -
1,982.8 Hz (DV 25p)
Dynamic range : 300% or more
Video
Recording format : 720/24p, 720/25p, 720/30p, 576/50p,
480/60p (U/E model), 480/24p, 480/
60i (U model), 576/25p, 576/50i (E
model)
Video Format:
[HDV]
Video signal record-
ing format
: HDV720p format, 8-bit, 19.7 Mbps
Compression : MPEG-2 video (profile & level:
MP@H-14)
[DV]
Video signal record-
ing format
: DV format, 8-bit, 25 Mbps
Compression : DV compression, 4:1:1 (NTSC)/4:2:0
(PAL)
Audio:
[HDV]
Audio signal record-
ing format
: MPEG1 Audio Layer II
[DV]
Audio signal record-
ing format
: 16-bit (locked audio), 48 kHz PCM
for 2 channels or 12-bit, 32 kHz PCM
for 4 channels
Usable tape : MiniDV tape
Tape speed : 18.8 mm/sec.
Record/play time : 63 minutes (with an M-DV63PROHD
tape)
Analog composite output
: 1.0 V (p-p), 75 , unbalanced (RCA)
Analog component output
Y : 1.0 V (p-p), 75 , unbalanced (RCA)
P
B/PR : 0.7 V (p-p), 75 , unbalanced (RCA)
Audio inputs
Mic : –60 dBs, 3 k, balanced (XLR), +48
V output for phantom power supply
Line : +4 dBs, 10 k, balanced (XLR)
Audio outputs : –8 dBs, low impedance, unbalanced
(stereo mini-jack)
Earphone jack : –17 dBs to –60 dBs, 8- impedance
(stereo mini-jack ×2)
IEEE1394 connector : 6-pin