Filter
Top Products
73
MENU SCREENS
AUDIO/MIC [2/2] Menu Screen
In VTR mode, the screen changes to the AUDIO menu screen.
Item Function/Setting (bold characters indicate initial settings)
AUDIO MONITOR Selects whether stereo or mixed audio is output from the PHONES jack when the MONITOR SELECT switch is set
to BOTH.
STEREO : Stereo audio (CH-1 audio is output to L and CH-2 audio is output to R)
* Outputs only the CH-1 audio from the monitor speaker.
MIX : Mixed audio (CH-1 and CH-2 mixed audio is output to L and R)
FAS AUDIO Selects the recording level adjusting method for FAS (Full Auto Shooting). (CH-1, CH-2)
AUTO :Sets to AUTO.
SW SET : Follows settings for the AUDIO SELECT switch.
X See “2 [CH-1/CH-2 AUDIO SELECT] switch” on page 13.
X See “h [FULL AUTO] switch” on page 18.
SEARCH AUDIO [DV] Selects whether to output audio when searching a tape recorded in DV format. (This also includes slow playback.)
ON : Audio is output.
OFF : Audio is not output.
PB AUDIO CH [DV] Selects which channel audio to output when playing back a DV tape with the audio signal recorded in 4 channels.
(Can only be set in VTR mode)
CH1/2 : Outputs the CH-1 and CH-2 channel audio.
This camcorder records the audio in CH-1 and CH-2 while shooting.
MIX : Outputs all 4 channels of audio at the same time.
CH3/4 : Outputs the CH-3 and CH-4 channel audio.
MEMO
This camcorder does not have a function for dubbing to the CH-3 and CH-4 channels.
PAGE BACK When the cursor is in this position, press the SHUTTER dial to the AUDIO/MIC [1/2] menu screen.