Filter
Top Products
Troubleshooting
If you encounter problems with this unit, check the following before requesting service.
1
Refer to “Trouble” below.
2
Refer to the “Troubleshooting” section in the “Detailed User Guide”.
If you have difficulties operating the unit, refer to the detailed descriptions in the
“Detailed User Guide”.
0
http://manual.jvc.co.jp/index.html/
0
You can also access the website from the supplied CD-ROM. (p. 19)
3
Refer to the FAQ of new products on JVC’s website.
0
http://www.jvc.com/
4
This unit is a microcomputer-controlled device. Electrostatic discharge, external
noise and interference (from a TV, a radio, etc.) might prevent it from functioning
properly.
In such a case, reset the unit.
A
Turn off the power. (Close the LCD monitor.)
B
Remove the AC adapter and battery pack from this unit, reattach them, and
this unit powers on automatically.
5
If the above do not solve the problem, consult your nearest JVC dealer or JVC
service center.
Trouble
Trouble Action Page
Power
POWER/CHARGE lamp
starts blinking when the
monitor is closed.
0
The battery pack is being charged.
6
Recording
Recording cannot be
performed.
0
Set to the recording mode with the L (Play/
Record) button.
13
Recording stops
automatically.
0
Turn off this unit, wait for a while, and turn it on
again. (This unit stops automatically to protect the
circuit when the temperature rises.)
-
0
Recording stops automatically after 12 hours of
continuous recording.
-
Playback
No date/time display.
0
Set “ON-SCREEN DISPLAY” in the playback
menu accordingly.
-
Sound or video is
interrupted.
0
Sometimes playback is interrupted at the
connecting section between two scenes. This is
not a malfunction.
-
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/
23
Getting StartedRecordingPlaybackCopying
Further
Information