Filter
Top Products
24 EN
BASIC OPERATIONS
MasterPage: Body_Left
1 Set the power switch to while pressing down the
lock button located on the switch.
2 Press MODE to select .
● The camera is programmed to record voice on the medium
in the CF slot by the factory preset. To switch the recording
medium, see pages 26 and 27.
● To change the sound quality and recording level, see pages
26 and 30.
3 Press the recording start/stop button to start recording.
4 To stop recording, press the recording start/stop button
again. The camera re-enters the record-standby mode.
NOTE:
For approximate recording time, see page 43.
Deleting Files
If you press during recording mode, the file recorded
most recently will be deleted.
● However, if the recording mode (video, still image or voice) is
switched or the power is turned off and on again after
recording, you cannot delete the file.
1 Set the power switch to while pressing down the
lock button located on the switch.
2 Press MODE to select .
● To change the playback speed, see pages 26 and 30.
● To switch the medium to be played back, see pages 26 and
27.
3 Press 49 to start playback.
4 To pause playback, press 49 again.
To adjust the speaker volume
During playback slide the zoom lever towards T to turn up
the volume, or towards W to turn down the volume.
To check the file information
Press INFO when playback is paused.
To select the file on the index display
Slide the zoom lever to W when playback is paused so
that the index display appears. Then press rt to select
the file and press 49.
Playback Operations
High-Speed Search
Press
3
or
5
during playback.
Locating the start point of the file or skip the file
Press
2
or
6
during playback or pause mode.
Deleting Voice Files
Press , then press rt to select [EXECUTE] and press
49.
● You can select the desired file to be deleted by pressing w
e.
● To delete multiple files at once, see pages 26 and 29.
Voice Recording
Power Switch
Lock Button
MODE
2
3
6
5
49
Zoom Lever
Recording Start/Stop
Button
Voice Playback
GZ-MC100PAL.book Page 24 Tuesday, December 28, 2004 1:04 PM