Filter
Top Products
36 EN
REFERENCES
MasterPage: Body_Left
NUMBER OF FOLDERS OVERFLOW
Appears when the number of folders exceeds the limit for
file copy/move operation.
MEMORY CARD ERROR!
REINSERT CARD OR CHANGE CARD
Appears when the camera does not recognise the loaded
recording medium. Remove the medium once and insert it
again or replace with another medium.
FILE SYSTEM MAY HAVE PROBLEM
FORMAT IS RECOMMENDED AFTER COPYING
WANTED DATA
The file system of the recording medium may have a
problem. It is recommended to copy the data for backup,
then format the medium.
VIDEO MANAGEMENT FILE IS BROKEN
TO RECORD/PLAYBACK VIDEO, RECOVERY IS
REQUIRED
The video management file is broken. Recovery is
required to record or play back video files. Press r t to
select [YES], then press 49 to recover the video
management file. If the desired video file is not displayed
on the video index screen in spite of the file recovery, the
file is moved to the [EXTMOV] folder. Press the recording
start/stop button in the index screen to display [MPG], and
then select the desired file.
NO VIDEO MANAGEMENT FILE
VIDEO FILES HAVE BEEN MOVED TO MPEG FOLDER
The data cannot be recorded properly, or the video
management file is deleted or not found. The extension of
the corresponding video file is changed from “.MOD” to
“.MPG”. Video files have been moved to MPEG
(EXTMOV) folder.
PLAY LIST’S MANAGEMENT INFORMATION IS
BROKEN
REMAKE PLAY LIST AGAIN
The management information of play list is broken. Create
the play list again.
NO REGISTERED SCENES IN PLAY LIST
SOME OF SCENES MAY NOT BE PLAYED BACK
The video files registered in the play list do not exist.
Some of the scenes may not be played back.
REGISTERED SCENES IN PLAY LIST IS EMPTY
THIS PLAY LIST WILL BE DELETED
There is no scenes registered in the play list. The play list
will be deleted.
CAMERA TEMPERATURE IS GOING UP
TURN CAMERA OFF, PLEASE WAIT
The temperature of the camera is too high. Turn off the
power, then wait for a while.
CAMERA TEMPERATURE IS TOO LOW
KEEP CAMERA POWER ON, PLEASE WAIT
The temperature of the camera is too low. Keep the power
on and wait for a while.
RECORDING FAILURE
● Performance of recording medium is poor. Use the
Cleanup function [CLEAN UP] in the menu.
● The writing speed of recording medium is slow, or the
recording medium is corrupted. Use the recording
medium to which the operation is guaranteed. See
page 42 for the guaranteed media to work with this
camera.
● The recording medium was subjected to vibrations or
jolts. Be careful not to subject the recording medium to
vibrations or jolts.
RECORDING MAY NOT BE CORRECT ON THE
MEMORY CARD
The data may not be recorded on the recording medium
correctly. Try recording again.
Otherwise, clean up the recording medium.
MEMORY CARD CANNOT BE PLAYED BACK
CORRECTLY
The recording medium cannot be played back correctly.
Try playback again.
CANNOT USE IN VIDEO MODE
The operation is not available in the video mode.
GZ-MC100PAL.book Page 36 Tuesday, December 28, 2004 1:04 PM