JVC GZ-MC100US Digital Camera User Manual


 
24 EN
BASIC OPERATIONS
MasterPage: Body_Left
1 Set the power switch to while pressing down the
lock button located on the switch.
2 Press MODE to select .
The camera is programmed to record voice on the medium
in the SD slot by the factory preset. To switch the recording
medium, see pages 26 and 27.
To change the sound quality and recording level, see pages
26 and 30.
3 Press the recording start/stop button to start recording.
4 To stop recording, press the recording start/stop button
again. The camera re-enters the record-standby mode.
NOTE:
For approximate recording time, see page 43.
Deleting Files
If you press during recording mode, the file recorded
most recently will be deleted.
However, if the recording mode (video, still image or voice) is
switched or the power is turned off and on again after
recording, you cannot delete the file.
1 Set the power switch to while pressing down the
lock button located on the switch.
2 Press MODE to select .
To change the playback speed, see pages 26 and 30.
To switch the medium to be played back, see pages 26 and
27.
3 Press 49 to start playback.
4 To pause playback, press 49 again.
To adjust the speaker volume
During playback slide the zoom lever towards T to turn up
the volume, or towards W to turn down the volume.
Playback Operations
High-Speed Search
Press
3
or
5
during playback.
Locating the start point of the file or skip the file
Press
2
or
6
during playback or pause mode.
Deleting Voice Files
Press , then press rt to select [EXECUTE] and press
49.
You can select the desired file to be deleted by pressing w
e.
To delete multiple files at once, see pages 26 and 29.
Voice Recording
Power Switch
Lock Button
MODE
2
3
6
5
49
Zoom Lever
Recording Start/Stop
Button
Voice Playback
GZ-MC100US.book Page 24 Thursday, September 9, 2004 2:51 PM