Filter
Top Products
62 EN Troubleshooting (Continued)
Trouble Action
੬
Recording (Continued)
The LCD monitor
indications blink.
● Certain modes of program AE, effect, DIS, and other functions
that cannot be used together are selected at the same time.
–
Digital zoom does not
work.
● Set [ZOOM] to [40X] or [300X].
● Digital zoom is not available in the still image recording mode.
57
–
The recorded image is
white.
● In bright places, setting “Nightscope” or a slow speed is not
recommended.
26
The focus is not
adjusted automatically.
● Set focus to the automatic mode.
● Clean the lens and check the focus again.
25
66
The colour of the image
looks strange.
● Try manual white balance adjustment.
25
The recorded image is
too dark.
● Try backlight compensation or manual exposure.
25
27
The recorded image is
too bright.
● Try manual exposure.
25
White balance setting
cannot be activated.
● Do not select the sepia (SEPIA) or monotone (MONOTONE)
mode before setting white balance.
26
The continuous
shooting speed of still
images is slow.
● The continuous shooting speed will drop when repeatedly making
continuous shots, when using certain recording media, or under
certain recording conditions.
–
Playback
Playback cannot be
performed.
● Select the recording medium properly.
● To watch images on a TV, set the TV’s input mode or channel that
is appropriate for video playback.
17
34
The same image is
displayed for a long
time during video
playback, or motion is
choppy.
● The surface of the disk or card is damaged. It is recommended to
run check disk regularly on the PC, providing that there is no data
on the hard disk of the camera.
–
The black & white fader
does not work.
● Do not select the sepia (SEPIA) or monotone (MONOTONE)
mode.
37
There is a noise during
playback.
● The sound of the hard disk drive may have been recorded if the
camera was moved suddenly during recording. Do not move or
shake the camera suddenly during recording.
–
M6E6PAL.book Page 62 Friday, March 10, 2006 9:16 AM