Filter
Top Products
SVENSKA
NEDERLANDS
ESPAÑOL
FRANÇAIS
DEUTSCH
ENGLISH
15-EN
Adjusting the Settings in Record Mode
The camera options listed in the previous section allow you to control how you want
pictures to be taken and how to manage the pictures in the camera’s memory.
To change one or more camera options, here’s what you should do:
1. Press the Mode/Menu button for over 2 seconds before releasing it.
2. Each option appears (shown by a continuous blinking) on the LCD panel one at a
time. To go to the next option, press the Mode/Menu button and release it
instantly.
3. To select the option currently shown on the LCD panel, press the Shutter button.
The camera is switched back to Record mode.
4. Repeat steps 1, 2 and 3 to view more options and make your desired selections.
5. To finish changing the camera settings, press the Mode/Menu button for over
2 seconds to return to Record mode.
Setting Picture Quality
Different elements combine to determine the quality of the pictures that you take.
● Resolution: The camera stores images at 640 X 480 resolution.
● Compression: The camera saves pictures using two levels of image compression:
Normal (high compression) or Fine (low compression). Low compression produces
higher quality images but less number of pictures can be taken. Higher compression
produces acceptable quality images and allows more pictures to be taken.
— Normal Quality (120 images)
— Fine Quality (60 images)
To select the picture quality:
1. Make sure that the camera is in Record mode. Then, press the Mode/Menu button
for over 2 seconds to enter the camera options in Record mode.
2. To select normal quality, press the Shutter button when N blinks on the LCD panel.
3. To select fine quality, press the Mode/Menu button and release it instantly. When F
blinks on the LCD panel, then press the Shutter button to select the option.
Setting the Self-Timer
The Self-Timer creates a 10-second delay between the time you press the Shutter
button and the time the picture is taken. You can activate the Self-Timer by selecting the
Self-Timer on option in Record mode. When the Self-Timer is selected, the Self-Timer
indicator at the front of the camera lights in red. Pressing the shutter button turns on the
Self-Timer. The Self-Timer indicator starts blinking, then blinks more quickly for the last
3 seconds.
After a picture has been taken, the Self-Timer sets off automatically. You will need to
enter the camera options in Record mode and turn on the Self-Timer every time you
want to use it.
— Self-Timer Off
— Self-Timer On