JVC GR-SXM250 Camcorder User Manual


 
14
Tracking
Eliminates noise bars that appear on-screen during
playback. To activate Manual Tracking:
1) Press the TRACKING Wheel
1 for approx.
2 seconds. MT
: appears.
2) Rotate the TRACKING Wheel
1 so that the
noise bars disappear.
To return to Auto Tracking, press the TRACKING
Wheel
1 for approx. 2 seconds or set the Power
Switch
@ to OFF and then PLAY again. AT
: blinks. When Auto Tracking finishes, the
indication disappears.
When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and
AT
: appears.
Manual Tracking may not work with tapes
recorded on other VCRs or camcorders.
TBC (Time Base Corrector)
Removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes.
To activate/release the TBC mode, press TBC
4
during playback for more than 1 second. When the
TBC mode is activated, TBC
G is displayed.
The TBC indicator
G turns green (grey with a
camcorder equipped with a black/white view-
finder) while TBC is working, and white while TBC
is not operative.
TBC does not work during Still Playback and
Shuttle Search (
pg. 11).
It may take a few seconds before TBC actually
starts working.
The picture may be distorted if the TBC mode is
activated or deactivated at the edit-in/-out points
or when normal playback resumes after Still
Playback or Shuttle Search (
pg. 11).
If the playback picture is distorted when TBC is
set to on, turn off TBC.
Counter Memory
Makes it easier to locate a specific tape segment.
1) Press COUNTER R/M
w and hold for more than
1 second. The counter
J resets to 0:00:00.
2) Press COUNTER R/M
w for less than 1 second.
M appears.
3) After recording or playback, press 5
r, then
2
e. The tape automatically stops at or close
to 0:00:00.
4) Press
4
/6 & to start playback.
The counter memory functions in the Fast-
Forward and Rewind modes.
To disable the counter memory function, press
COUNTER R/M
w for less than 1 second so that
M disappears.
GR-SXM250US 3/11/03, 10:27 AM14