Filter
Top Products
34 EN
Connection To A Windows
®
PC
Image data stored in the camcorder’s built-in memory can
be transferred to a Windows
®
PC and saved using the
image transfer software, Picture Navigator*. The image
data transferred to a Windows
®
PC can also be further
processed using Mr. Photo Gold*, and the still image
processed on the PC can be inserted onto a tape
(੬ pg. 53).
To assure safety, make sure all units are turned off before
making any connection.
1
Connect the camcorder’s DIGITAL connector to the
COM Port (RS-232C) on a Windows
®
PC, using the
PC connection cable*.
2
Set the Power Switch to “ ”. The VIDEO Lamp
comes on. If the DSC Lamp is not lit, press REFRESH
for approx. 1 second to select “DSC”. A still image
stored in memory appears.
•When transferring still images to a computer, be
sure that a still image is displayed on the screen.
3
Launch the software* on your Windows
®
PC. Transfer
the still images stored in the camcorder’s memory to
the Windows
®
PC. Refer to the software’s instruction
manual on the CD-ROM* for details.
•During transfer of the still image, the camcorder’s
screen becomes blue and “ ” is
displayed. After transferring is finished, the screen
displays the same still image as in step 2.
4
Close the software*, then switch off the camcorder.
For Windows
®
:
To COM Port
(RS-232C)
Makes the DSC lamp come on.
PC connection
cable*
To DIGITAL
connector
NOTES:
●
Before transferring still images from your personal computer to the camcorder’s built-in memory, perform the
camcorder’s Picture Mode Setting (
੬
pg. 16). The still images will be transferred from the personal
computer in the selected Picture Mode.
●
When transferring still images from your personal computer to the camcorder, make sure the number of
images to be transferred is smaller than the camcorder’s remaining number of shots available.
●
Use the AC Adapter as the power supply instead of the battery pack.
●
The still images stored in the camcorder’s memory are not automatically removed after being transferred to
the PC. If you wish to remove those still images from the camcorder’s memory, delete them (
੬
pg. 33).
●
Windows
®
are trademarks of Microsoft Corporation, registered in the U.S.A. and other countries.
D.S.C. PLAYBACK
(cont.)
Open the cover.
*Provided with GR-SXM930 only.