Filter
Top Products
EN 29
+
–
FEATURE: Manual Tracking
PURPOSE: To eliminate noise bars that appear
on the screen during playback.
OPERATION: 1)Press either +/– button as many
times as necessary for best picture.
NOTES: ●
To reset TRACKING to the original
preset, press both + and – buttons
simultaneously.
●
Manual Tracking may not work
with tapes recorded on other VCRs
or camcorders.
FEATURE: Still Playback
PURPOSE: To pause during playback.
OPERATION: 1)Press PLAY/PAUSE during
playback.
2)To resume normal playback, press
PLAY/PAUSE again.
NOTE:
Noise bars appear and pictures may
become monochrome during Still
Playback. This is normal.
FEATURE: Shuttle Search
PURPOSE: To allow high-speed search in either
direction.
OPERATION:
Forward Search
1)Press FF during playback.
Reverse Search
1)Press REW during playback.
NOTE:
Noise bars appear and pictures may
become monochrome or darken in
Shuttle Search. This is normal.
FEATURE: Counter Memory Function
PURPOSE: To make it easier to locate a specific
tape segment.
OPERATION: 1)Press COUNTER R/M and hold for
more than 2 seconds. The counter
resets to “0:00:00”.
2)Press COUNTER R/M. “M”
appears.
3)After recording or playback, press
STOP, then REW. The tape
automatically stops at or close to
0:00:00.
4)Press PLAY/PAUSE to start
playback.
NOTES: ●
The counter memory functions in
the FF and REW modes.
●
To disable Counter Memory
Function, press COUNTER R/M so
the “M” disappears.
PLAYBACK
Features
COUNTER R/M
FF
PLAY/PAUSE
STOP
REW