Filter
Top Products
EN 5
3
4
2
1
1
3
2
Using the battery pack
1
Hook-on the battery pack's top end to the
camcorder. (Charging procedure, ੬ pg. 6)
2Push in the battery pack until it locks into
place.
To remove the battery pack
Slide BATT. RELEASE and pull out the battery
pack.
QUICK OPERATION GUIDE
1 Slide the LENS COVER open/close knob to
open the lens cover.
2 Set the power switch to “CAMERA”.
— The power indicator will light and an
image will appear in the LCD monitor or
the viewfinder.
3 Press the Recording Start/Stop button.
— Recording starts.
•To stop recording temporarily, momentarily
press the Recording Start/Stop button once
again.
(For more details, ੬ pg. 14, 15)
•The viewfinder switches off automatically to
save power when the LCD monitor is
opened at an angle of over 45 degrees.
•The LCD monitor turns on/off when it is
opened/closed at approx. 45 degrees.
SUPPLY POWER
INSERTING A VIDEO
CASSETTE
PLAYBACK
SHOOTING
1 Slide MONITOR OPEN to open the LCD
monitor.
•Open to an angle of over 45 degrees.
2 Press EJECT to open the cassette holder.
3 Insert a video cassette.
4 Press PUSH to close the cassette holder.
(For more details, ੬ pg. 11)
3
2
1
PLAY/PAUSE
STOP
REW
2
1
Hook on.
Push in.
BATT. RELEASE
Set to “PLAY”
LENS COVER
open/close knob
Recording Start/Stop button
Set to “CAMERA”
MONITOR OPEN
EJECT
PUSH
1Set the power switch to “PLAY”.
2 Press REW.
—The tape will automatically stop at the
beginning of the tape.
3Press PLAY/PAUSE.
—Playback starts and the playback picture
appears in the viewfinder or the LCD
monitor.
•To stop playback, press STOP.
(For more details, ੬ pg. 32.)
•The viewfinder switches off automatically to
save power when the LCD monitor is
opened at an angle of over 45 degrees.
•The LCD monitor turns on/off when it is
opened/closed at approx. 45 degrees.
Or simply play back the tape on a VHS
VCR using the Cassette Adapter. ੬ pg. 35