Filter
Top Products
Master Page: Right
M2D2(-DSC)sheet.fm Page 3
—3—
A camcorder can be connected to a PC that satisfies the following requirements.
Windows
®
Macintosh
● The system requirements information above is not a guarantee that the provided software will work on all
personal computers meeting those requirements.
● Microsoft
®
and Windows
®
are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
● Macintosh is a registered trademark of Apple Computer, Inc.
● Keyspan is a trademark of InnoSys Inc.
● Other product and company names included in this instruction manual are trademarks and/or registered
trademarks of their respective holders.
OPERATING ENVIRONMENT
OS : Windows
®
98 (pre-installed),
Windows
®
98 Second Edition (98SE) (pre-installed),
Windows
®
Millennium Edition (Me) (pre-installed),
or Windows
®
2000 Professional (pre-installed)
CPU : Intel MMX
®
Pentium
®
, at least 200 MHz
RAM : At least 64 MB recommended
Free hard disk space : At least 10 MB for installation, at least 500 MB recommended
Connectors : 1 free serial transmission port, compatible with 9600 bps or higher transmission
rate, connectable to RS-232C with 9 pin serial connector
(Recommended compatible with UART 16550A)
Display : Must be capable of displaying 800 x 600 dots with 16-bit color
NOTE:
An optional 9 pin serial conversion adapter is required for computers using a serial communication port
other than a standard 9 pin.
Hardware : iMac, iBook, Power MacintoshG3, Power MacG4, Power BookG3 or G4
equipped with a USB connector
OS : Mac OS 8.6 to 9.1 (exclude Mac OS X)
RAM : At least 64 MB recommended
Free hard disk space : At least 2 MB for installation, at least 40 MB recommended
Miscellaneous : QuickTime 4 or later
M2D2(-DSC)sheet.fm Page 3 Wednesday, November 7, 2001 10:36 AM