JVC LYT1196-001B Camcorder User Manual


 
22 EN
MasterPage: Heading0_Left
ADDITIONAL FEATURES FOR D.S.C. (GR-D93/D73 only)
The Protect mode helps prevent the accidental erasure
of files.
1 Load a memory card. (pg. 10)
2 Set the VIDEO/MEMORY Switch to MEMORY.
3 Set the Power Switch to PLAY while pressing down
the Lock Button located on the switch.
A stored file is displayed.
4 Press the MMENU/VOL. Wheel in. The Menu Screen
appears.
5 Make sure PROTECT is
selected, and press the MMENU/
VOL. Wheel in. The Sub Menu
appears.
To protect the currently
displayed file
6 Rotate the MMENU/VOL.
Wheel to select CURRENT, and
press it. The PROTECT screen
appears.
7 Press 3 or 5 to select the
desired file.
8 Rotate the MMENU/VOL.
Wheel to select EXECUTE, and
press it.
To cancel protection, select
RETURN.
Repeat steps 7 and 8 for all files
you want to protect.
To protect all files stored in the memory card
6 Rotate the MMENU/VOL. Wheel to select
PROT.ALL, and press it. The PROTECT screen
appears.
7 Rotate the MMENU/VOL. Wheel to select
EXECUTE, and press it.
To cancel protection, select RETURN.
NOTES:
If the “” mark appears, the currently displayed file is
protected.
When the memory card is initialized or corrupted, even
protected files are deleted. If you do not want to lose
important files, transfer them to a PC and save them.
To Remove Protection
Before doing the following, perform steps 1 5 in
Protecting Files.
To remove protection from the currently displayed
file
6 Rotate the MMENU/VOL. Wheel to select
CURRENT, and press it. The PROTECT screen
appears.
7 Press 3 or 5 to select the desired file.
8 Rotate the MMENU/VOL. Wheel to select
EXECUTE, and press it.
To cancel selection, select RETURN.
Repeat steps 7 and 8 for all files you want to remove
protection.
To remove protection from all files stored in the
memory card
6 Rotate the MMENU/VOL. Wheel to select
CANC.ALL, and press it. The PROTECT screen
appears.
7 Rotate the MMENU/VOL. Wheel to select
EXECUTE, and press it.
To cancel selection, select RETURN.
Previously stored files can be deleted either one at a time
or all at once.
1 Load a memory card. (pg. 10)
2 Set the VIDEO/MEMORY Switch to MEMORY.
3 Set the Power Switch to PLAY while pressing down
the Lock Button located on the switch.
A stored file is displayed.
4 Press the MMENU/VOL. Wheel in. The Menu Screen
appears.
5 Rotate the MMENU/VOL. Wheel to select DELETE,
and press it. The Sub Menu appears.
To delete the currently displayed file
6 Rotate the MMENU/VOL.
Wheel to select CURRENT, and
press it. The DELETE screen
appears.
7 Press 3 or 5 to select the
desired file.
8 Rotate the MMENU/VOL.
Wheel to select EXECUTE, and
press it.
To cancel deletion, select
RETURN.
Repeat steps 7 and 8 for all files
you want to delete.
NOTE:
If the “” mark appears, the selected file is protected and
cannot be deleted.
Protecting Files
MENU
DISPLAY
BRI HT
END
G
PROTECT
DELETE
DPOF
NO .RESET
FORMAT
PROTECT
M
E
NU
RENT
PROT.ALL
CANC.ALL
RETURN
CUR
ROTECTP
RETURN
PROTECTED
Deleting Files
Power Switch
Lock Button
3
VIDEO/MEMORY
5
MMENU/VOL.
DELETE
M
E
NU
RENT
ALL
RETURN
CUR
ELETED
EXECUTE
DELETE?
RETURN
GR-D73US.book Page 22 Thursday, November 20, 2003 10:50 AM