JVC LYT1196-001B Camcorder User Manual


 
MENUS FOR DETAILED ADJUSTMENT
28 EN
MasterPage: Left
GR-D73: 640 x 480 / [1024 x 768]
GR-D93: 640 x 480 / 1024 x 768 / [1280 x 960] /
1600 x 1200
The Image Size mode can be selected to best match
your needs. (pg. 18)
NOTE:
The settings can be changed only when the VIDEO/
MEMORY Switch is set to MEMORY.
[]: When Snapshot recording is performed with the
VIDEO/MEMORY Switch set to VIDEO, still images are
recorded only onto the tape.
/ : When Snapshot recording is performed
with the VIDEO/MEMORY Switch set to VIDEO, still
images are recorded not only onto the tape but also in
the memory card (640 x 480 pixels). In this mode, the
SNAP MODE selection in CAMERA Menu is also
applicable to memory card recording.
VIDEO
[ ] = Factory-preset
SOUND MODE and NARRATION
During tape playback, the camcorder detects the sound
mode in which the recording was made, and plays the
sound back. Select the type of sound to accompany your
playback picture. According to the menu access
explanation on page 25, select SOUND MODE or
NARRATION from the Menu Screen and set it to the
desired parameter.
[STEREO ]: Sound is output on both L and R
channels in stereo.
SOUND L : Sound from the L channel is output.
SOUND R : Sound from the R channel is output.
[OFF]: Original sound is output on both L and R
channels in stereo.
ON: Dubbed sound is output on both L and R
channels in stereo.
MIX: Original and dubbed sounds are combined and
output in stereo on both L and R channels.
NOTES:
For GR-D93/73 Owners: You can also use AUDIO button
on the provided remote control (pg. 15) to change the
output sound (without having to access the Playback
Menu).
The SOUND MODE setting is available for both 12-bit and
16-bit sound. (In previous models functions, 12-bit is
called 32 kHz and 16-bit is called 48 kHz.)
The camcorder cannot detect the sound mode in which the
recording was made during fast-forward or rewind. During
playback the sound mode is displayed in the upper left
corner.
Allows you to set the video recording mode (SP or LP)
depending on your preference. It is recommended you
use REC MODE in VIDEO Menu when using this
camcorder as a recorder during dubbing. (pg. 34, 35)
NOTE:
REC MODE can be set when the Power Switch is set to
PLAY or M.
[OFF]: When the SNAPSHOT button is pressed during
tape playback, the playback image pauses and normal
playback will resume after approximately 6 seconds.
(The still image is not recorded.)
ON: Enables dubbing of images recorded on a tape to a
memory card. (pg. 19)
[OFF]: Disables audio/video signal input from the AV and
S-Video connectors. (pg. 34)
ON: Enables audio/video signal input from the AV and S-
Video connectors. (pg. 34)
SYSTEM
Each setting is linked with s, which appears when the
Power Switch is set to M. (pg. 25)
The parameters are the same as in the description on
page 27.
[ ] = Factory-preset
VIDEO DISPLAY
The n (VIDEO DISPLAY) settings are effective only for
video playback except BRIGHT.
The parameters (except OFF in ON SCREEN settings)
are the same as in the description on page 27.
[ ] = Factory-preset
pg. 9, Brightness Adjustment Of The Display
When set to OFF, the camcorders display disappears.
When set to AUTO, the date/time are displayed in the
following cases:
When playback starts. The camcorder displays the date/
time when scenes are recorded.
When the date is changed during playback.
IMAGE SIZE
REC SELECT
Playback Menus
SOUND MODE
NARRATION
REC MODE [SP] / LP
COPY (GR-D93/73 only)
S/AV INPUT (GR-D93/73 only)
BEEP OFF / BEEP / [MELODY]
REMOTE OFF / [ON]
DEMO MODE OFF / [ON]
PRIORITY [LCD] / FINDER
CAM RESET EXECUTE / RETURN
BRIGHT
ON SCREEN OFF / [LCD] / LCD/TV
DATE/TIME [OFF] / AUTO / ON
TIME CODE [OFF] / ON
GR-D73US.book Page 28 Thursday, November 20, 2003 10:50 AM