JVC LYT1919-001C Camcorder User Manual


 
38
EN
Troubleshooting (Continued)
Trouble Action
Displays
The LCD monitor
appears blank.
Operate the camera.
If the camera is not operated for a certain length of time when
using the AC adapter, it will enter sleep mode, and the LCD
monitor will turn off.
Playback
The same scene
appears stopped for a
long time.
Replace the microSD card.
(If there are scratches etc. on the microSD card, the camera will
have diffi culty reading the data, and this phenomenon may occur.
The camera will try to play back as much as possible, but if this
condition continues, the camera will not be able to play back the
video and it will automatically stop.)
Perform cleanup or formatting.
Video movement
appears jerky.
The color of images
looks strange.
When recording the white balance was not correctly adjusted.
When the video was recorded with x.v.Color™ set to [ON], change
the setting as desired on TV.
Set [EFFECT] to [OFF].
Images look unnatural
on the TV (long and thin
etc.)
Change [VIDEO OUTPUT] in the [BASIC SETTINGS] to match
your TV.
Dubbing
When dubbing, the
connected video device
does not start recording
automatically.
Operate the video device manually to start and stop recording.
Other problems
The camera operates
slowly when switching
between video mode
and still image mode,
or when switching the
power on or off.
Copy all fi les from the media onto your computer, and erase the
fi les from the media.
(If there are many still images (more than 1,000 fi les) on the
media, it takes time for the camera to process the fi les.)
The lamp does not fl ash
during battery charging.
Check the remaining battery charge.
(When the battery is fully charged, the lamp does not fl ash.)
When recharging in either a hot or cold environment, ensure that
battery is being charged within the permitted temperature range.
(If the battery is being recharged outside the permitted
temperature range, recharging may stop to protect the battery.)
The remote control
doesn’t work.
Replace the battery.
Set [REMOTE] in the [BASIC SETTINGS] to [ON].
The remote control may not operate outdoors or in places
exposed to strong light.