Filter
Top Products
24
[Password] Enter the password to be used in authentication
with the FTP server. (The entered characters are
displayed as “*”.)
[Host IP Address] Enter the IP address of the upload destination FTP
server.
[FTP Port] Enter the upload destination FTP port number.
[FTP Folder] Enter the upload destination folder name in the
FTP server. If this is not entered, the images will
be uploaded in the default folder.
[Upload Interval] Enter the interval for image uploading to the FTP
server. (It is possible to upload earliest by setting
this item at 0 second.)
● [Disconnect every time]
Check this box to disconnect the connection after
every image uploading.
*
This makes it necessary to establish a
connection before the next time an image is
uploaded.
[Error Recovery] ● [On connect error]
Select the operation to be performed in case of
an error related to the TCP connection or FTP
authentication.
• [Retry forever]: ........... The connection will be
retried until the VN-
C30U is turned OFF.
•
[Retry in every * min]
: .... The connection will be
retried for the specified
period.
● [On transfer error]
Select the operation to be performed in case of
a file transfer error while images are uploading.
• If [Stop Uploading] ........................ is checked:
The FTP function of the VN-C30U is disabled
automatically in case of a transfer error.
*To resume the FTP operation, check [Available]
in [FTP function].
03.10.17, 11:20 AMPage 24