Filter
Top Products
11
4 Remove the inner dome
The inner dome is fastened using 2 catches.
Remove the inner dome by unfastening it from
the catches.
5 Remove the outer casing
(This mounting method does not make use of an
outer casing. )
A
Remove the fastening screw from the camera
unit using a screwdriver
B Turn the camera unit in the anti-clockwise
direction to remove the outer casing
6 Remove the attached fall prevention
wire
Remove the fall prevention wire that is attached
to the camera unit.
Ⅵ Connection
Memo:
● For details, please also refer to the [READ
ME FIRST] (sheet) provided.
Note:
● For your safety, turn on the power only after
all connections are completed.
1 Mount the fall prevention wire that
connects the camera and the ceiling
to the camera unit
2 Connect the alarm cables and audio
cables
3 Connect the LAN cable
4 Connect the power cable
Note:
● Connection of a power cable is not necessary
when PoE is used.
Memo:
● For cables that are not used, be sure to wrap
the ends individually with insulating tape.
5 Insert the camera unit into the hole in
the ceiling
B
A
4
6
5
5
Camera unit fastening
screw
Inner dome
Outer casing
1
3
2, 4
5
Solder welding or
crimping
Insulating tape
Fall
prevention
wire