Filter
Top Products
Getting FTP Server Address Setting from VN-V25/26
Format
/api/param?application.ftp.host
Example of Response
application.ftp.host=192.168.0.200&200 OK
Response example when setting field is left blank
application.ftp.host=&200 OK
Interpretation Acquire the FTP server address setting used for FTP transmission via alarm.
Allowed users admin, operator, user
Setting FTP Server Address for VN-V25/26
Format
/api/param?application.ftp.host=data
Example
/api/param?application.ftp.host=10.0.0.200
Example of Response
application.ftp.host&200 OK
Interpretation Change the FTP server address setting used for FTP transmission via alarm. Specify the IP address
or FQDN. The maximum FQDN size is 63 bytes. Specify as 0.0.0.0 when the FTP server is not set. It is also possible
to leave the setting field blank as follows.
/api/param?application.ftp.path=%00
Allowed users admin, operator
Getting FTP Server Path Setting from VN-V25/26
Format
/api/param?application.ftp.path
Example of Response
application.ftp.path=subdir1&200 OK
Response example when setting field is left blank
application.ftp.path=&200 OK
Interpretation Acquire the FTP server directory setting used for FTP transmission via alarm.
Allowed users admin, operator, user
Setting FTP Server Path for VN-V25/26
Format
/api/param?application.ftp.path=data
Example
/api/param?application.ftp.path=subdir1
Example of Response
application.ftp.path&200 OK
Interpretation Change the FTP server directory setting used for FTP transmission. It is possible to set FTP
transmission to a directory under the FTP server home directory by specifying that directory name. Use %2F to
segment the directory. ("2F" is ASCII code of "/".) The maximum directory name size is 63 bytes.
Example
/api/param?application.ftp.path=subdir1%2Fsubdir2
By leaving the setting blank as follows, FTP transmission will be set to the FTP server home directory.
/api/param?application.ftp.path=%00
Allowed users
admin, operator
Getting FTP Server User Name Setting from VN-V25/26
43