Filter
Top Products
4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
Electric Blanket Type: WB1, WB2, WB3 and WB4
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Snugasabug
®
Tie-Down Electric Blanket
•Carefully read all instructions before
operating the Kambrook Snugasabug
®
Tie-Down Electric Blanket and save for
future reference.
•Remove any packaging material and
promotional stickers before using the
Kambrook Electric Blanket for the first
time.
•Use the Electric Blanket only with the
detachable controller KB31 provided.
Refer to the markings on the heating unit
for the model number of the controller.
•Connect only to a 230V or 240V power
outlet.
• Use this blanket as an under blanket only.
•Not recommended for futons or similar
folding bedding systems.
•This blanket is not recommended to
be used on an adjustable bed. If used
on an adjustable bed, check that the
blanket or cord cannot become caught,
creased, kinked or damaged in any way.
•Make sure that the heating area (wire
element) on any side of the bed does
not hang over the edge of the mattress
and that the following instructions are
read carefully before using the blanket.
•Do not use this blanket with an infant,
an infirm person or anyone insensitive to
heat.
• Use only for human use, not for pets.
•Overly extended application at a high
setting can result in skin irritation or burns.
•Avoid sharp objects. Do not insert pins
or any sharp objects into the electric
blanket as they may damage the
electrical wiring.
• Do not use pins – they may damage the
electric wiring.
• Do not use folded, rucked or rolled.
•Do not tuck in.
• Do not use creased, folded or damaged
in any way.
•Keep control unit away from an open
window.
•Be sure that this blanket is used only on
an alternating current supply circuit of
correct voltage.
• The flexible power supply cord and
controller must, as far as practicable, be
kept outside the bed.
•Be sure that the electric blanket is
installed so that at all times the flexible
supply plug is adjacent and accessible
to the main power outlet.
•Do not use the electric blanket if it is wet
•Switch off at the power outlet and
remove plug when this blanket is not in
actual use.
• This blanket must be kept in the fully
spread condition at all times during use
to avoid overheating. It is imperative
KEB302_IB_FA.indd 4 12/10/09 10:13 AM