Kodak 1099969 Digital Camera User Manual


 
42 www.kodak.com/go/support
Getting help
Direct printing (PICTBRIDGE enabled Printer) problems
Picture is too dark Reposition the camera for more available light.
Use Fill flash (see page 7) or change your position so light is not
behind the subject.
Move so that the distance between you and the subject is within the
effective flash range. (See Specifications starting on page 44.)
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
Picture is too light Reposition the camera to reduce the amount of available light.
Turn the flash off (see page 7).
Move so that the distance between you and the subject is within the
effective flash range. (See Specifications starting on page 44.)
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
In Smart Capture mode, adjust the Exposure Compensation (see
page 31).
Status Solution
Cannot print to a
PICTBRIDGE Printer
In the Setup menu, change the Computer Connection setting to
Other Application (see page 35).
Status Solution